Abstract:The introduction of heterostructures is a new approach in gas sensing due to their easy and quick transport of charges. Herein, facile hydrothermal and solid-state techniques are employed to synthesize an α-Fe2O3/Nb2O5 heterostructure. The morphology, microstructure, crystallinity and surface composition of the synthesized heterostructures are investigated by scanning electron microscope, transmission electron microscope, x-ray diffraction, x-ray photoelectron spectroscopy and Brunauer–Emmett–Teller analyses. The successful fabrication of the heterostructures was achieved via the mutual incorporation of α-Fe2O3 nanorods with Nb2O5 interconnected nanoparticles (INPs). A sensor based on the α-Fe2O3(0.09)/Nb2O5 heterostructure with a high surface area exhibited enhanced gas-sensing features, maintaining high selectivity and sensitivity, and a considerable recovery percentage towards ethanol gas. The sensing response of the α-Fe2O3(0.09)/Nb2O5 heterostructure at lower operating temperature (160 °C) is around nine times higher than a pure Nb2O5 (INP) sensor at 180 °C with the flow of 100 ppm ethanol gas. The sensors also show excellent selectivity, good long-term stability and a rapid response/recovery time (8s/2s, respectively) to ethanol. The superior electronic conductivity and upgraded sensitivity performance of gas sensors based on the α-Fe2O3(0.09)/Nb2O5 heterostructure are attributed due to its unique structural features, high specific surface area and the synergic effect of the n–n heterojunction. The promising results demonstrate the potential application of the α-Fe2O3(0.09)/Nb2O5 heterostructure as a good sensing material for the fabrication of ethanol sensors.

Wireless antenna sensor with CuO@Cu-vertical graphene and cysteine-PDMS composite for ethanol gas detection

Design of Highly Sensitive and Selective Ethanol Sensor Based on Α-Fe2o3/nb2o5 Heterostructure.

Boosting Ethylene Glycol Sensing with Dendritic Hierarchical Cuo/Co3o4 Heterojunction Nanowire

Room-Temperature Ethanol Sensors Based on Amorphous Ta2O5/Pd Hybrid Microspheres

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

Fabrication of a Wireless Portable Ethanol Detecting Device Based on Synthesized CuO Nanoplates With the Capability to Alert for Elevated Gas Levels

High Performance Gas Sensor Based on ZnO/CuO Heterostructures

Development of a Sensitive Gas Sensor by Trapping the Analytes on Nanomaterials and in Situ Cataluminescence Detection

Highly sensitive ethanol gas sensor based on CuO/ZnSnO3 heterojunction composites

CuO/TiO2/MXene-Based Sensor and SMS-TENG Array Integrated Inspection Robots for Self-Powered Ethanol Detection and Alarm at Room Temperature

Self-oxidized AgCu Nano-Foam with Unique Phase Structure for Ethanol Sensors Breaking Through the Trade-off Between Sensitivity and Upper Linear Limit

An Ethanol Vapor Sensor Based on a Microfiber with a Quantum-Dot Gel Coating.

Machine-learning-aided Identification of Ethanol in Humid Air Using Zinc Complex Capped CsPbBr3 Resistive Sensors

Ultrasensitive Ethene Detector Based on a Graphene-Copper(I) Hybrid Material

Ag Decorated CuGaO2 Nanosheets for Enhanced Ethylene Glycol Detection

Ethanol Gas Sensing with Lower Temperature and Higher Response Based on Three-Dimensional Multilevel Materials Composed of Micron Hollow Carbon Spheres@sno2 Nanoparticles

A Low Power Bridge-Type Gas Sensor with Enhanced Sensitivity to Ethanol by Sandwiched ZnO/Au/ZnO Film Sputtered in O₂ Atmosphere

Ethanol Gas Sensor Based on a Hybrid Polymethyl Methacrylate–Silica Microfiber Coupler

Tuning the sensing responses towards room-temperature hypersensitive methanol gas sensor using exfoliated graphene-enhanced ZnO quantum dot nanostructures

Gas-sensitive synergistic effect of Au-decorated ZnO nano-structured materials for rapid ethanol detection based on simulated sunlight activation

The highly sensitive ethanol sensor based on nanocomposites of ZnO in-situ grown on 2D Ti3C2Tx nanosheet