Abstract:The traditional Fischer–Tropsch synthesis generates products with a distribution that follows a theoretical restriction, suffering from low selectivity toward desired products. Recent use of metal oxide–zeolite bifunctional catalysts has allowed a break of such a restriction, accompanied by residual CO molecules. In these systems, CO conversion is usually low and the presence of residual CO molecules would accompany the diffusion of intermediates into the zeolite pores and the subsequent transformation. However, the relationship between CO and the selectivity is elusive. Herein, in a CoMn oxides/H-β zeolite system, we demonstrate that CO molecules could not only improve the strength of the acidity and increase the ratio of B acid sites to L acid sites of the zeolite but also help to stabilize the intermediate allylic carbonium ion. Hence, high selectivities of 73.5% toward iso-paraffins and 61.2% toward isobutane were achieved. Our results are informative for future efforts on the control over the selectivity of syngas direct conversion.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.1c00411?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.1c00411</a>.N<sub>2</sub> isothermal adsorption–desorption curves, HRTEM image, X-ray diffraction patterns, density of acid sites, and elemental chemical compositions of the MZ-H-β zeolite; catalytic performance and possible mechanism for ethylene conversion over the MZ-H-β zeolite; catalytic performance of the FT reaction over the CoMn oxide catalyst; X-ray diffraction patterns and HRTEM image of the spent CoMn oxide catalyst; and DFT calculation results (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.1c00411/suppl_file/cs1c00411_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Selective synthesis of butane from carbon monoxide using cascade electrolysis and thermocatalysis at ambient conditions

Cascade Electrocatalytic and Thermocatalytic Reduction of CO2 to Propionaldehyde

C2–C4 Hydrocarbons Synthesis from Syngas over CuO–ZnO–Al2O3/SAPO‐34 Bifunctional Catalyst

Cascade Conversion of CO2 to Ethylene Carbonate under Ambient Conditions

Selective Conversion of CO2 into Propene and Butene

Highly Selective Electrocatalytic CO2 Conversion to Tailored Products Through Precise Regulation of Hydrogenation and C-C Coupling.

Cascade electrolysis and thermocatalysis: a reliable system for upgrading C1 to C4 hydrocarbons

Bimetallic Metal Sites in Metal-Organic Frameworks Facilitate the Production of 1-Butene from Electrosynthesized Ethylene

Cascade Conversion of CO 2 to Ethylene Carbonate under Ambient Conditions

A Green and Efficient Electrocatalytic Route for the Highly-Selective Oxidation of C-H Bonds in Aromatics over 1D Co3O4-Based Nanoarrays

Mechanistic Insight into Hydrocarbon Synthesis via CO2 Hydrogenation on χ-Fe5C2 Catalysts

Unlocking direct CO 2 electrolysis to C 3 products via electrolyte supersaturation

Highly Selective Electrocatalytic CO 2 Conversion to Tailored Products through Precise Regulation of Hydrogenation and C-C Coupling

Coverage-driven Selectivity Switch from Ethylene to Acetate in High-Rate CO_2/CO Electrolysis

Controllable CO adsorption determines ethylene and methane productions from CO2 electroreduction

Selective Synthesis Of Para-Xylene And Light Olefins From Co2/H-2 In The Presence Of Toluene

Controlling product selectivity in hybrid gas/liquid reactors using gas conditions, voltage, and temperature

Direct Synthesis of Extra-Heavy Olefins from Carbon Monoxide and Water

CO Electrolysis to Multicarbon Products over Grain Boundary-Rich Cu Nanoparticles in Membrane Electrode Assembly Electrolyzers

Direct Production of Lower Olefins from CO2 Conversion via Bifunctional Catalysis

Role of Residual CO Molecules in OX–ZEO Relay Catalysis for Syngas Direct Conversion