Abstract:The electroreduction of carbon monoxide (CO) on copper (Cu) in aqueous media is known to generate industrially relevant C2 + chemicals. CO originating from a CO2 capture source combined with CO electrolysis, powered with renewable energy and water, provides us with a method of producing green chemicals. However, the industrial applicability of this technology is still in the nascent stage. In this work, we explore the boundaries of what can realistically be achieved with the current state-of-the-art technology, to gauge the feasibility of employing CO reduction as a means of carbon valorization in an industrial setting, focusing on ethylene and ethanol as products of interest due to their market size and value. In this study commercial heterogeneous electrocatalysts were analyzed, applied on a GDL to form a GDE and then ranked with respect to ethylene and ethanol FE. Subsequently, the limits of production rate and single pass conversion were evaluated, and the effect of temperature on product selectivity investigated. Finally, durability under industrially relevant conditions was studied. We found that it is possible to operate at current densities of up to −2500 mA cm-2 without any appreciable increase in the faradaic yield towards hydrogen, yielding a total FE to C2 + products of 87 % and an ethylene FE of 35 %. We also demonstrate that temperature has a (positive) influence on the FE for ethylene, at the cost of a reduction in acetate formation. Additionally, we show that single pass conversions of up to 89 % can be achieved without loss of FE towards C2 + products. However, despite these promising results, we also show that catalyst durability remains a key challenge for long-term industrial operation of CO electroreduction.

Coverage-driven Selectivity Switch from Ethylene to Acetate in High-Rate CO_2/CO Electrolysis

Efficiently Electroreducing CO2 to Ethylene on Heterostructured CeO2/CuO

Site-selective Protonation Enables Efficient Carbon Monoxide Electroreduction to Acetate

Constraining CO coverage on copper promotes high-efficiency ethylene electroproduction

Promoting Electrolysis of Carbon Monoxide toward Acetate and 1-Propanol in Flow Electrolyzer

Coverage enhancement accelerates acidic CO2 electrolysis at ampere-level current with high energy and carbon efficiencies

Selective electroreduction of CO2 to acetone by single copper atoms anchored on N-doped porous carbon

Promoting CO 2 Electroreduction to Acetate by an Amine-Terminal, Dendrimer-Functionalized Cu Catalyst

Promoting CO<sub>2</sub> Electroreduction to Acetate by an Amine-Terminal, Dendrimer-Functionalized Cu Catalyst

A silver–copper oxide catalyst for acetate electrosynthesis from carbon monoxide

Temperature-dependent selectivity for CO electroreduction on copper-based gas-diffusion electrodes at high current densities

Sulfite‐Assisted Acetate Conversion from CO Electroreduction

Coordination Polymer Electrocatalysts Enable Efficient CO‐to‐acetate Conversion

Chemical upgrade of carbon monoxide to acetate on an atomically dispersed copper catalyst via CO-insertion

CO 2 Electroreduction to Acetate by Enhanced Tandem Effects of Surface Intermediate over Co 3O 4 Supported Polyaniline Catalyst

Electrochemical Reduction of CO2: A Common Acetyl Path to Ethylene, Ethanol or Acetate

Localized Alkaline Environment via In Situ Electrostatic Confinement for Enhanced CO2-to-Ethylene Conversion in Neutral Medium

CO Electrolysis to Multicarbon Products over Grain Boundary-Rich Cu Nanoparticles in Membrane Electrode Assembly Electrolyzers

Surface Hydroxyl Groups Enhance Ethylene Selectivity in Acidic CO2 Reduction Reaction

Carbon‐Efficient CO2 Electrolysis to Ethylene with Nanoporous Hydrophobic Copper

Accelerating electrochemical CO2 reduction to multi-carbon products via asymmetric intermediate binding at confined nanointerfaces