Abstract:Rising atmospheric carbon dioxide (CO2) concentrations has led to an increased focus on electrochemical CO2 reduction using low-cost renewable electricity to produce low-carbon-intensity fuels and chemical feedstocks. The electrosynthesis of multicarbon (C2+) hydrocarbons and oxygenates, such as ethylene and ethanol, from CO2 feedstocks is appealing due to the large global market demand of these high-value products. Industrial-scale implementation of this technology requires operation at reaction rates above 100 mA/cm2 to minimize electrolyzer capital costs. Gas diffusion electrodes (GDEs) feed CO2 directly to the electrocatalyst surface, alleviating mass transport limitations faced in traditional aqueous environments and enabling operation at industrially relevant reaction rates. However, when implemented in conventional liquid flow cells with alkaline or neutral electrolytes, major challenges emerge in maintaining electrolyte stability with detrimental carbonate and bicarbonate formation, consequently having adverse effects on energy efficiency. Here we introduce therefore a membrane electrode assembly (MEA) based CO2 electrolyzer for C2+ production. We investigate the extent to which it can overcome the electrolyte stability limitations by eliminating alkaline electrolyte degradation and neutral electrolyte salt precipitation typically observed in the conventional approach. The MEA design maintains its performance while operating at elevated temperatures and low partial pressures of CO2, important considerations for industrial reactors. We further design a copper catalyst that takes advantage of the high CO2 concentrations afforded by the MEA. This catalyst design strategy achieves more than 50% Faradaic efficiency towards ethylene and more than 80% Faradaic efficiency towards C2+ products while operating at more than 300 mA/cm2. We demonstrate the stability of the system design through the continuous generation of ethylene while operating at industrially-relevant currents for more than 100 hours. The outcome is an engineered system that provides the longest stable ethylene production amongst all CO2 electrolyzers at reaction rates greater than 100 mA/cm2. To reduce costs associated with gas product separation from dilute streams, maximizing CO2 utilization is important. We investigate alternative flow field designs for the MEA reactor to achieve uniform reactant distribution, leading to improved current densities and reduced hydrogen evolution by at least 25% each. Finally, we demonstrate the process and system scalability through C2+ production in a large-scale MEA electrolyzer as part of the NRG COSIA Carbon XPRIZE.

CO Electrolysis to Multicarbon Products over Grain Boundary-Rich Cu Nanoparticles in Membrane Electrode Assembly Electrolyzers

Grain-Boundary Engineering Boosted Undercoordinated Active Sites for Scalable Conversion of CO2 to Ethylene

Accelerating electrochemical CO2 reduction to multi-carbon products via asymmetric intermediate binding at confined nanointerfaces

Carbon Dioxide Electroreduction to Multi-Carbon Products Using a Large-Scale Membrane Electrode Assembly

Highly efficient ampere-level CO 2 reduction to multicarbon products via stepwise hollow-fiber penetration electrodes

Silica-copper Catalyst Interfaces Enable Carbon-Carbon Coupling Towards Ethylene Electrosynthesis

Efficient electrocatalytic CO2 reduction to C2+ chemicals on internal porous copper

Electrochemical CO2 Reduction to Ethylene by Ultrathin CuO Nanoplate Arrays

Grain Boundary‐Derived Cu+/Cu0 Interfaces in CuO Nanosheets for Low Overpotential Carbon Dioxide Electroreduction to Ethylene

Direct Low Concentration CO2 Electroreduction to Multicarbon Products Via Rate-Determining Step Tuning

Energy- and Carbon-Efficient CO2/CO Electrolysis to Multicarbon Products Via Asymmetric Ion Migration–adsorption

Breaking the Linear Scaling Relationship by Compositional and Structural Crafting of Ternary Cu–Au/Ag Nanoframes for Electrocatalytic Ethylene Production

Selective Increase in CO2 Electroreduction to Ethanol Activity at Nanograin‐Boundary‐Rich Mixed Cu(I)/Cu(0) Sites via Enriching Co‐Adsorbed CO and Hydroxyl Species

Continuous Carbon Dioxide Electroreduction to Concentrated Multi-carbon Products Using a Membrane Electrode Assembly

Stabilized Cuδ+-OH species on in situ reconstructed Cu nanoparticles for CO2-to-C2H4 conversion in neutral media

Low coordination number copper catalysts for electrochemical CO2 methanation in a membrane electrode assembly

Unconventional Grain Fragmentation Creates High-Density Boundaries for Efficient CO2-to-C2+ Electro-conversion at Ampere-Level Current Density

Carbon‐Efficient CO2 Electrolysis to Ethylene with Nanoporous Hydrophobic Copper

Highly Electrocatalytic Ethylene Production from CO 2 on Nanodefective Cu Nanosheets

High-Rate and Selective CO 2 Electrolysis to Ethylene via Metal-Organic-Framework-Augmented CO 2 Availability.

Interface regulation promoting carbon monoxide gas diffusion electrolysis towards C2+ products