Abstract:Abstract The Gas Electron Multiplier (GEM) is a new age detector, which can handle the high flux of particles. The GEM foil, which is constructed using 50 μm highly insulating foil (Kapton/Apical) coated with 5 μm layers of copper, on both sides, with a network of specifically shaped holes is the major component of these detectors. The European Center for Nuclear Research (CERN) has been the sole supplier of the GEM foils until recently when a few other companies started manufacturing GEM foils under the transfer of technology (TOT) agrement from CERN. Techtra is one such company in Europe which gained a right to use CERN developed technology in order to produce commercially viable GEM foils. Micropack Pvt. Ltd. is another company in India which has successfully manufactured good quality GEM foils. Due to the microscopic structure of holes and dependence on the electric field inside, it becomes essential to study the defect and uniformity of holes along with the electrical property of foils under ambient conditions. In this work we are reporting the tests condition of Techtra GEM foils. We report on the development of a cost effective and efficient technique to study the GEM foils holes geometry, distribution, and defects. We also report on the electrical properties of these foils like leakage current, stability, and discharges. At the detector level, we describe the high voltage (HV) response, gain, uniformity, and stability. The GEMs have been proposed to have a wider applications, so we performed a feasibility study to utilize these for the imaging. We irrediated various objects of varying density with X-rays and reconstructed the images. The reconstructed image shows a good distinction between materials of different densities, which can be very useful in various applications like medical imaging or cargo imaging.

Wire GEM detector

Gas electron multipliers with metal electrodes and their applications in detectors

First Tests of Gaseous Detectors Made of a Resistive Mesh

The Micro Wire Detector

Photosensitive Strip RETHGEM

Application of a Wedge Strip Anode in Micro-Pattern Gaseous Detectors

GEMs with Double Layred Micropattern Electrodes and their Applications

Investigation on the performance of a thick ceramic gas electron multiplier

Impact of the gas choice and the geometry on the breakdown limits in Micromegas detectors

Experimental Study on the Performance of Tri-GEM Gas Detector

Study of charging up effect in a triple GEM detector

Study on the performance of a high-gain gas electron multiplier-MicroMegas chamber

The qualification of GEM detector and its application to imaging

First studies with the Resistive-Plate WELL gaseous multiplier

Study of Gas Electron Multiplier Detector Using ANSYS and GARFIELD$^{++}$

A New GEM-like Imaging Detector with Electrodes Coated with Resistive Layers

Fabrication of Micro Gap by Electroplating and the Applications to Gas Detecting

Toward Application of a Thick Gas Electron Multiplier (THGEM) Readout for a Dark Matter Detector

Progress in Developing Hybrid RPCs: GEM-like Detectors with Resistive Electrodes

Thick GEM-like (THGEM) detectors and their possible applications

FETs Array Readout of GEM Detector