Abstract:High-energy chemistry is a method of accelerating chemical reactions by transferring copious amounts of energy to individual molecules. The synthesis of acetylene and benzene is a valuable chemical process used in many organic products. The article proposes an original scheme of experimental setup and technology for plasma-activated methane conversion into acetylene and benzene. The system enables the creation of two distinct active zones within the reactor: the "hot zone," where plasma and active elements are generated, and the "relaxation zone," where the synthesis of organic products occurs. The optimal temperature of the blowing gas, i.e., the gas that propels the plasma reactor walls, has been found to be a crucial factor in heat removal from reaction zones. This temperature has been observed to vary within an interval of 290–310°K, while the reactor gas pressure has been identified as a significant variable within a range of 10–40 mbar. These two factors have been identified as the primary determinants of the yield of products, with acetylene yields reaching approximately 70–80% and maximal benzene yields reaching 40%. Furthermore, the duration of plasma exposure is a critical variable in methane conversion. The optimal acetylene yield of 80% was achieved when the reactor was operated in stationary mode for 15 s. A variation of the input gas flow in flow mode within an interval of 5–15 m 3 /h resulted in a decrease in the yield of acetylene to 60 percent, while an increase in the benzene yield up to 50 percent was observed. This was accompanied by an overall increase in the total volume of products produced per time unit. A general qualitative model of methane reforming is proposed, combining methane dehydration in the plasma flame with direct synthesis of acetylene from carbon and hydrogen atoms in the relaxation zone. Benzene formation occurs through the trimerization of acetylene molecules under heat dissipation near the reactor walls.

Modeling of Acetylene Formation from Methane in a Plasma Jet

Kinetic Modeling and Experimental Validation of the Pyrolysis of Propane in Hydrogen Plasma

Pyrolysis of propane to acetylene using high-power rotating arc hydrogen plasma

Development and Process of Pyrolysis of Light Alkanes to Acetylene by Thermal Plasma

Numerical Analysis of Methane Pyrolysis in Thermal Plasma for Selective Synthesis of Acetylene

Experimental Comparison of Methane Pyrolysis in Thermal Plasma

Process Development and Reactor Analysis of Coal Pyrolysis to Acetylene in Hydrogen Plasma Reactor

Understanding of gas-phase methane pyrolysis towards hydrogen and solid carbon with detailed kinetic simulations and experiments

Chemical Kinetics of Methane Pyrolysis in Microwave Plasma at Atmospheric Pressure

Discharge dynamics, plasma kinetics and gas flow effect in argon–acetylene discharges

Simulation and Analysis of Fixed-Bed Reactor for Hydrochlorination of Acetylene

Detailed Chemistry Modeling of Partial Combustion of Natural Gas for Coproducing Acetylene and Syngas

A Study of Acetylene Production by Methane Flaming in a Partial Oxidation Reactor

Methane pyrolysis for hydrogen production: Modeling of soot deposition by computational fluid dynamics and experimental validation

Study On Coal Pyrolysis In Ar/H-2 Plasma Jet

SIMULATION OF H2/Ar THERMAL PLASMA JET REACTOR

Synthesis of Acetylene and Benzene in Controlled Methane-Plasma System

A molecular-level analysis of gas-phase reactions in chemical vapor deposition of carbon from methane using a detailed kinetic model

Development of a microkinetic model for non-oxidative coupling of methane over a Cu catalyst in a non-thermal plasma reactor

Methane pyrolysis in packed bed reactors: Kinetic modeling, numerical simulations, and experimental insights

Numerical Simulation Study on Plasma Rapid Heater of Methane