Abstract:The existing research on continuous structure is usually analyzed with finite element method (FEM) and granular medium with discrete element method (DEM), but there are few researches on the coupling interaction between continuous structure and discrete medium. To the issue of this coupling interaction, a multi-scale simulation method with coupled finite/discrete element model is put forward, in their respective domains of discrete and finite elements, the nodes follow force law and motion law of their own method, and on the their interaction interface, the touch type between discrete and finite elements is distinguished as two types: full touch and partial touch, the interaction force between them is calculated with linear elastic model. For full touch, the contact force is proportional to the overlap distance between discrete element and finite element patch. For partial touch, first the finite element patch is extended on all sides indefinitely to be a complete plane, the full contact force can be obtained with the touch type between discrete element and plane being viewed as full touch, then the full overlap area between them and the actual overlap area between discrete element and finite element patch are computed, the actual contact force is obtained by scaling the full contact force with a factor η which is determined by the ratio of the actual overlap area to the full overlap area. The contact force is equivalent to the finite element nodes and the force and displacement on the nodes can be computed, so the ideal simulation results can be got. This method has been used to simulate the cutter disk of the earth pressure balance shield machine (EPBSM) made in North Heavy Industry (NHI) with its excavation diameter of 6.28 m cutting and digging the sandy clay layer. The simulation results show that as the gradual increase of excavating depth of the cutter head, the maximum stress occurs at the roots of cutters on the cutter head, while for the soil, the largest stress is distributed at the region which directly contacted with the cutters. The proposed research can provide good solutions for correct design and installation of cutters, and it is necessary to design mounting bracket to fix cutters on cutter head.

A mechanics model of constant cross-section type disc cutter based on dense core forming mechanism

A cutting mechanics model of constant cross-section type disc cutter and its application based on dense core theory

Development of a Real-Time Monitoring and Calculation Method for TBM Disc-Cutter's Cutting Force in Complex Ground

Modeling of Non-Linear Cutting Forces for Dry Orbital Drilling Process Based on Undeformed Chip Geometry

A New Calculation Model of Cutterhead Torque and Investigation of Its Influencing Factors

A new prediction model for disc cutter wear based on Cerchar Abrasivity Index

Design and finite element analysis of a variable cross-section cutter ring

Force and wear prediction model of disc cutter under compression shear failure mode based on dense core–cavity expansion theory (U-713)

Multi-scale simulation method with coupled finite/discrete element model and its application

Determination of cutting force and failure surface using a blunt cutter under confining condition: analytical modelling

Analysis on the Rock–Cutter Interaction Mechanism During the TBM Tunneling Process

Investigating the cutting force of disc cutter in multi-cutter rotary cutting of sandstone: Simulations and experiments

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Multi-physics analytical modeling of the primary shear zone and milling force prediction

A New Semi-Theoretical Disc Cutter Performance Prediction Model Considering Curvature Radius

On the Steady-State Workpiece Flow Mechanism and Force Prediction Considering Piled-Up Effect and Dead Metal Zone Formation

Prediction model for disc cutter wear during hard rock breaking based on plastic removal abrasiveness mechanism

A Cutting Force Model for a Waved-Edge End Milling Cutter

Comparison of the specific energies of sinusoidal VCS cutter rings and CCS cutter rings in breaking rock-like materials based on the FEM

Study of contact pressure distribution between cutter and rock surface using the discrete element method

Dynamic Cutting Force Model and Vibration Analysis of the Cutterhead in TBM