Abstract:Calculating disc cutter wear and predicting wear life are long-standing issues affecting the efficiency and cost of tunnel boring machines (TBMs). During the TBM excavation process, the wear of the disc cutter is a comprehensive outcome of the interaction between the tool and rock. Studying the mechanisms of tool rock breaking and wear can assist in developing a more precise model for predicting cutter wear. Therefore, based on the rock-breaking and wear mechanisms of a cutter, this study developed a model for predicting the cutter wear rate and life. The model is based on the theory of dense core–cavity expansion combined with the motion state of a cutter. First, the TBM excavation process and rock-breaking mechanism of a cutter were analyzed in detail. A cutting force model under the compression shear failure mode based on the dense core–cavity expansion theory was established. Based on the force model, a prediction model for the wear rate and life of the disc cutter was established, considering the working characteristics and wear mechanism. Furthermore, the impact of penetration on the prediction model was investigated. In addition, to demonstrate the practicality of the method, this study conducted a comprehensive examination using engineering examples. The results showed that the average difference in the cutter average wear rate using the developed model was less than 3% compared with the actual engineering result. In addition, the average difference in the wear life rate was less than 5%. Finally, the developed prediction method was compared with other models. The wear rate fitting accuracy was improved by 4.91–10.85% and the wear life fitting accuracy was improved by 5.11–12.19% by the developed method. This improvement confirms the reasonableness and reliability of the method. This method can estimate the wear rate and lifespan of a cutter more accurately and reliably than other methods, providing a practical tool to TBM engineers to make informed decisions and optimize tool replacement programs.

Force and wear prediction model of disc cutter under compression shear failure mode based on dense core–cavity expansion theory (U-713)

The energy method to predict disc cutter wear extent for hard rock TBMs

Performance Evaluation of TBM Using an Improved Load Prediction Model

Enhanced Wear Prediction of Tunnel Boring Machine Disc Cutters for Accurate Remaining Useful Life Estimation Using a Hybrid Model

Development of a Prediction Model for the Wear Evolution of Disc Cutters on Rock TBM Cutterhead

Prediction model for disc cutter wear during hard rock breaking based on plastic removal abrasiveness mechanism

Evaluation of TBM Cutter Wear in Granite and Developing a Cutter Life Prediction Model for Face Cutters Based on Field Data: A Case Study

Prediction Model of TBM Disc Cutter Wear During Tunnelling in Heterogeneous Ground

A Wear Rule and Cutter Life Prediction Model of a 20-in. TBM Cutter for Granite: A Case Study of a Water Conveyance Tunnel in China

Development of a Real-Time Monitoring and Calculation Method for TBM Disc-Cutter's Cutting Force in Complex Ground

Prediction Model for TBM Disc Cutter Wear in Mixed-face Ground Condition

The Derivation and Validation of TBM Disc Cutter Wear Prediction Model

Machine learning-based prediction model for disc cutter life in TBM excavation through hard rock formations

Experimental Study on Partial Wear of TBM Disc Cutter

Research on Numerical Simulation of Rock Breaking Using Tbm Disc Cutters Based on Udec Method

A cutting mechanics model of constant cross-section type disc cutter and its application based on dense core theory

Analysis on the Rock–Cutter Interaction Mechanism During the TBM Tunneling Process

A new prediction model for disc cutter wear based on Cerchar Abrasivity Index

Study on Wear Prediction of Shield Disc Cutter in Hard Rock and Its Application

Prediction of TBM Cutter Wear in Heterogeneous Ground under High Ambient Pressure

Prediction model of wear rate of inner disc cutter of engineering in Yinsong, Jilin