Abstract:The study of rock fragmentation mechanism significantly contributes to the advancing speed of tunnel boring machines (TBMs). In this sense, numerous factors are shaping the rock fragmentation mechanism of their disccutters. Among them, rock structural parameters, such as joint inclination, orientation, spacing, etc., considerably impact cutting force as well as rock-cutting process. However, detailed relationships between rock-cutting parameters and rock mass ones have not been to date proven, and rock fragmentation mechanism still needs to be investigated in depth. In this paper, a three-dimensional (3D) discrete element model of rock-cutting using a disccutter was established via the high-performance MatDEM software. To simulate the fragmentation performance of the rock undergoing the impact load, an elastic-plastic contact model was firstly proposed based on the linear elastic contact model, verified by several mechanical experiments. Then, the influence of different joint parameters (e.g., joint inclination, orientation, spacing, etc.) on cutting force and rock fragmentation volume was examined. At the same time, the effect of joint parameters on specific energy (SE) was calculated to explore the joint influence on rock-cutting efficiency. The simulation results show that the elastic-plastic contact model can better simulate the plastic deformation characteristics of the brittle rock, and the improved model can imitate the generation of the rock fragment structure. As well, the influence of the joint orientation and spacing on the mean value of the cutting force and the rock fragmentation volume is obvious, and the propagation mode of the internal cracks in the rock varies with reference to the joint orientation. The existence of the joints also decreases the rock-cutting SE, and consequently the rock-cutting efficiency can reach the highest level when the joint spacing is equal to 50 mm and the joint orientation is about 30 degrees. The opposite inclination of the joint correspondingly leads to the opposite change in the rock-cutting parameters, which can be eliminated through rotating cutting in practice. This study explores the influence of joint parameters on rock-cutting ones and reveals crack distribution mechanism in jointed rock mass.

Research on Numerical Simulation of Rock Breaking Using Tbm Disc Cutters Based on Udec Method

Theoretical and Applied Research of the Deformation of the Continuous Cutterhead of TBM

Fragmentation Energy-Saving Theory of Full Face Rock Tunnel Boring Machine Disc Cutters

Comparative Study of the Rock-breaking Mechanism of a Disc Cutter and Wedge Tooth Cutter by Discrete Element Modelling

Experimental and Numerical Investigations on Rock Breaking of TBM Disc Cutter Based on a Novel Platform with Rotational Cutting

Numerical simulation and experimental studies of rock-breaking methods for pre-grooving-assisted disc cutter

Comparison of DEM Models with Different Elemental Dimensions for TBM Disc Cutter Rock Fragmentation

Numerical study on the rock breaking mechanism of high-pressure water jet-assisted TBM digging technique based on 2D-DEM modelling

Investigation on Two-Step Simulation Modeling Method for Rock Breaking by TBM Disc Cutters Assisted with Laser

Rock Fragmentation Induced by a TBM Disc-Cutter Considering the Effects of Joints: A Numerical Simulation by DEM

Rock Crushing Analysis of TBM Disc Cutter Assisted by Ultra-High-Frequency Loading

Study of Rock-Cutting Process by Disc Cutters in Mixed Ground based on Three-dimensional Particle Flow Model

Research on Rock-Breaking Characteristics of Cutters and Matching of Cutter Spacing and Penetration for Tunnel Boring Machine

The mechanism and performance of rock breakage by undercutting disc cutter with advanced slotting

Study of the cutter-rock interaction mechanism during TBM tunnelling in mudstone: insight from DEM simulations of rotatory cutting tests

Simulation of indentation behavior of TBM disc cutter and failure mechanism of hard rock assisted by hydraulic precutting kerfs

Numerical and experimental investigation on rock breaking performance with hydraulic splitter

Electromagnetic-thermo-mechanical Coupled Modelling of Microwave-Assisted TBM Disc Cutting

Discrete Element Modeling of the Effects of Cutting Parameters and Rock Properties on Rock Fragmentation

Analysis on the Rock–Cutter Interaction Mechanism During the TBM Tunneling Process