Abstract:Purpose - This paper aims to provide a 3D finite element (FE) model for dynamic simulation of cutterhead and soil interaction in slurry shield tunneling. Design/methodology/approach - Dynamic numerical simulation of excavation process is realized by combined use of submodeling method and arbitrary Lagrangian Eulerian (ALF) approach. The model size reduction, soil mesh refinement and stress state initialization are fulfilled by submodeling. The large soil deformations, failures and flows are handled by ALE approach. Computation time is reduced by parallel domain decomposition with recursive coordinate bisection method. Validation of the proposed approach is achieved by comparing the numerical results with monitored data from the model test for Yangtze River tunneling project. Findings - The proposed approach proves to be an effective technique to simulate the cutterhead and soil interaction dynamically in tunnel excavation. Comparative study on the effect of mesh density indicates the requirement of relative mesh refinement. Exploration of the parallel computing performance points out the best decomposed domain for the simulation. Parametric study on the effect of rotary speed and investigation on soil properties presents the significant factors for torque. Practical implications - The proposed numerical model can help in the development process of reduced-scale model test, as well as design and selection of slurry shield machines. Originality/value - The originality comes from the need to evaluate the excavation performance of slurry shield machine in tunneling project. This contribution provides a 3D numerical approach, which takes into account the stress state in soil and dynamic contact effects between soil and cutterhead. In this work, large deformation in soil is handled. Besides, soil failures and flows are captured.

A New Calculation Model of Cutterhead Torque and Investigation of Its Influencing Factors

Determination of the Cutterhead Torque for EPB Shield Tunneling Machine

Torque Calculation Model of Cutting Head in Shield Machine and Experimental Study

Analysis of reverse torque of EPB shield tunneling in soft ground

Modeling and Analysis of Thrust Force for Epb Shield Tunneling Machine

Study on Design Theory and Method of Geology Adaptability for Earth Pressure Balanced Shield Tunneling Machine

Determination of Thrust Force for Shield Tunneling Machine

Total Thrust Calculation and Test Research for Soil Pressure Balancing Shield Tunneling

Performance Evaluation of TBM Using an Improved Load Prediction Model

A Cutterhead Energy-Saving Technique for Shield Tunneling Machines Based on Load Characteristic Prediction

Control model of earth pressure balance for shield tunneling

An experimental study on energy saving potential for cutterhead drive of shield Tunneling machine using variable-speed hydraulic system

Earth Layer Recognition During the Shield Machine Digging and Control Strategy of the Cutter Head Speed

Variable speed pump control system for driving cutter head of test shield tunneling machine

Development of a Real-Time Monitoring and Calculation Method for TBM Disc-Cutter's Cutting Force in Complex Ground

Efficiency Comparative Study for Hydraulic Drive System of Cutter Head in Shield Tunneling Machine

Numerical simulation of cutterhead and soil interaction in slurry shield tunneling

Identification and Optimization of Energy Consumption by Shield Tunnel Machines Using A Combined Mechanical and Regression Analysis

Energy Saving of Cutterhead Hydraulic Drive System of Shield Tunneling Machine

Experimental Study on Partial Wear of TBM Disc Cutter

Analysis of Mechanical Properties of Two Typical Kinds of Cutterheads of Shield Machine