Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Dynamic compressive behaviour of hybrid basalt-polypropylene fibre-reinforced concrete under confining pressure: Experimental characterisation and strength criterion

Dynamic non-linear Mohr–Coulomb strength criterion for hybrid basalt–polypropylene fibre-reinforced concrete under impact loading

High-strain Rate Compressive Behavior of CFRP Confined Concrete: Large Diameter SHPB Tests

Dynamic splitting tensile behaviour and statistical scaling law of hybrid basalt‒polypropylene fibre-reinforced concrete

Comparative analysis of dynamic constitutive response of hybrid fibre-reinforced concrete with different matrix strengths

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Dynamic Behavior of Reactive Powder Concrete in Split Hopkinson Pressure Bar Testing

Experimental investigation on the dynamic tensile behavior of graded steel-fiber RPC

Dynamic triaxial compressive response and failure mechanism of basalt fibre-reinforced coral concrete

Mechanical and Dynamic Properties of Hybrid Fiber Reinforced Fly-Ash Concrete

Research on the Impact Response and Model of Hybrid Basalt-Macro Synthetic Polypropylene Fiber Reinforced Concrete

Experimental study and theoretical analysis on dynamic mechanical properties of basalt fiber reinforced concrete

Experimental Study of the Mechanical Properties and Microstructure of Basalt Fiber-Reinforced Concrete

Research on Compressive Impact Dynamic Behavior and Constitutive Model of Polypropylene Fiber Reinforced Concrete

Experimental Study on Basic Mechanical Properties of Basalt Fiber Reinforced Concrete

Experimental Study on Impact Performance of Basalt-Polypropylene Fiber Reinforced High-Performance Concrete

Fractal characteristics of pore structure of hybrid Basalt–Polypropylene fibre-reinforced concrete

Dynamic strength criteria for basalt fibre-reinforced coral aggregate concrete

Dynamic compressive behavior of concrete confined with unidirectional natural flax FRP based on SHPB tests

Specimen Size Effect and Dynamic Increase Factor for Basalt Fiber–Reinforced Concrete Using Split Hopkinson Pressure Bar

Effect of Fiber Hybridization, Strain Rate and w/c Ratio on the Impact Behavior of Hybrid FRC