Abstract:As the civil aviation industry advances, higher requirements are put forward for the performance of airport cement pavement . The frequent takeoffs and landing of aircraft will cause continuous and large impact load on airport pavement, and combined with long-term natural factors, there will be various structural diseases. These diseases not only affect the service life of pavement, navigation safety. To enhance the impact resistance and durability of concrete, the incorporation of fiber has proven an effective approach, and basalt fibers (BF) and polypropylene fibers (PF) are selected as reinforcement materials in this study. Firstly, the effects of single BF and hybrid BF and PF on the mechanical properties of concrete were explored through compressive and flexural tests considering fiber volume contents (0.1%, 0.15, 0.2%) and lengths (6 mm, 9 mm, 12 mm). Then, the drop hammer impact test method, recommended by ACI committee 544, was refined to evaluate the impact resistance toughness of concrete. Finally, the numerical simulation of the impact test was established to explain the concrete impact damage mechanism. The results show that under less than 0.15% volume content, the single BF can effectively enhance the compressive strength , flexural strength, and impact resistance of concrete. Compared with the single BF, the combination of 12 mm BF and 6 mm PF yields favorable results, encompassing improved mechanical properties and impact resistance, thus exhibiting a positive hybrid effect. The increase in PF length (9 mm) leads to a reduction in compressive strength but an improvement in flexural strength and impact resistance. The simulation of the impact test is constructed and the accuracy is confirmed by comparing the impact times and failure patterns of the specimens. The tensile damage of plain concrete is much greater than the compressive damage, and the cracks will spread rapidly from the upper surface to the lower surface. Compared with plain concrete, the crack width of hybrid fiber reinforced concrete is larger, but the damage degree is more uniform. Fiber can absorb a large amount of impact energy, reduce the emergence of micro-cracks, and improve the impact toughness and toughness coefficient of concrete.

Comparative analysis of dynamic constitutive response of hybrid fibre-reinforced concrete with different matrix strengths

Dynamic non-linear Mohr–Coulomb strength criterion for hybrid basalt–polypropylene fibre-reinforced concrete under impact loading

Dynamic splitting tensile behaviour and statistical scaling law of hybrid basalt‒polypropylene fibre-reinforced concrete

Dynamic compressive behaviour of hybrid basalt-polypropylene fibre-reinforced concrete under confining pressure: Experimental characterisation and strength criterion

High-strain Rate Compressive Behavior of CFRP Confined Concrete: Large Diameter SHPB Tests

High-strain Rate Compressive Behavior of Concrete Made with Substituted Coarse Aggregates: Recycled Crushed Concrete and Clay Bricks

Research on the Impact Response and Model of Hybrid Basalt-Macro Synthetic Polypropylene Fiber Reinforced Concrete

Dynamic mechanical properties of hybrid fiber reinforced concrete

Effect of Fiber Hybridization, Strain Rate and w/c Ratio on the Impact Behavior of Hybrid FRC

Comparing Mechanical Characterization of Carbon, Kevlar, and Hybrid-Fiber-Reinforced Concrete under Quasistatic and Dynamic Loadings

Experimental study and theoretical analysis on dynamic mechanical properties of basalt fiber reinforced concrete

Research on Compressive Impact Dynamic Behavior and Constitutive Model of Polypropylene Fiber Reinforced Concrete

Experimental Study on Impact Performance of Basalt-Polypropylene Fiber Reinforced High-Performance Concrete

Mechanical performance of steel-polypropylene hybrid fiber reinforced concrete subject to uniaxial constant-amplitude cyclic compression: Fatigue behavior and unified fatigue equation

Hybrid effects of carbon nanotubes and steel fiber on dynamic mechanical properties of ultra-high performance concrete

Hybrid fiber concrete with different basalt fiber length and content

Experimental Study on Hybrid Effect Evaluation of Fiber Reinforced Concrete Subjected to Drop Weight Impacts.

An experimental and numerical study on the hybrid effect of basalt fiber and polypropylene fiber on the impact toughness of fiber reinforced concrete

A simplified dynamic constitutive model for BFRCAC under confining pressure considering the coupling effect of fibre reinforcement and mechanical damage

Property Assessment of High-Performance Concrete Containing Three Types of Fibers

Mechanical and Dynamic Properties of Hybrid Fiber Reinforced Fly-Ash Concrete