Abstract:Adjacent excavations may have adverse impacts on the existing tunnels. Due to the increasing demand for building excavations in close proximity to existing metro tunnels, ensuring the safety and integrity of tunnel structures is a major challenge for city designers and geotechnical engineers. Urban metro tunnels in soft areas of Chinese cities are often constructed using shield tunnelling technology, and the installed precast reinforcement concrete segmental lining are generally connected together by various steel bolts. Due to the presence of joints, the overall tunnel stiffness, including the bending stiffness and shearing stiffness, are significantly reduced. Due to the reduction in shearing stiffness, the tunnel longitudinal deformation can be decomposed into two distinct modes: a bending mode and a shearing dislocation mode. However, current methods for predicting tunnel longitudinal responses to adjacent excavations generally simplify a tunnel as an Euler-Bernoulli beam, which only considers the bending effect and ignores the shearing deformation of jointed tunnels. Moreover, tunnel-ground interactions are commonly considered through the Winkler foundation model, which is unable to account for the interactions of adjacent springs and leads to overestimations of shear forces and bending moments in shield tunnels. In this paper, a new analytical method is proposed that uses a Timoshenko beam to simulate jointed shield tunnel responses when subjected to an adjacent excavation, which can consider both the bending and shearing effects of a shield tunnel. The tunnel-ground interaction is considered by introducing Pasternak two-parameter foundation, which is able to further take account for the interaction between adjacent springs. The tunnel-excavation interaction is analyzed using a two-stage analysis method. First, the excavation-induced unloading stress on the existing tunnel is computed using Mindlin’s solution. Second, the tunnel longitudinal deformation due to the corresponding stress is calculated using finite difference method. The effectiveness of the proposed approach is validated by two well-document case histories, including finite element analysis and field measurement. The predicted results are also compared with those obtained using the traditional methods. Based on the verified analytical solution, a parametric analysis is also conducted to investigate the effects of key factors on the responses of existing tunnels, including excavation-tunnel relative position, ground Young’s modulus and equivalent shearing stiffness.

A new approach to evaluate the effect of over-boring and standstill time on thrust force of shielded TBMs based on penetration rate under squeezing conditions

Analysis of reverse torque of EPB shield tunneling in soft ground

Simplified analytical method for evaluating the effects of adjacent excavation on shield tunnel considering the shearing effect

Total Thrust Calculation and Test Research for Soil Pressure Balancing Shield Tunneling

Design and simulation analysis of gripper and thrust energy-saving system for TBM test rig

Modeling and Analysis of Thrust Force for Epb Shield Tunneling Machine

Coordinated Control of Gripper and Thrust System for TBM Based on Construction Data

Evaluation of Hard Rock Tunnel Boring Machine (TBM) Performance Using Stochastic Modeling

Study on Support Time in Double-Shield TBM Tunnel Based on Self-Compacting Concrete Backfilling Material

TBM performance analysis in very strong and massive rocks; case study: Kerman water conveyance tunnel project, Iran

Studying the Effect of Tunnel Depth Variation on the Specific Energy of TBM, Case Study: Karaj–Tehran (Iran) Water Conveyance Tunnel

Characteristics and Countermeasures of Tunnel Heave Due to Large-Diameter Shield Tunneling Underneath

Evaluation and Optimization of the Effective Parameters on the Shield TBM Performance: Torque and Thrust—Using Discrete Element Method (DEM)

Method to Avoid the Structural Interference of the Thrust System of a Shield Tunneling Machine

Experimental Study on Partial Wear of TBM Disc Cutter

Analysis of Ground Surface Settlement Induced by the Construction of a Large-Diameter Shallow-Buried Twin-Tunnel in Soft Ground

Developing the Rule of Thumb for Evaluating Penetration Rate of TBM, Using Binary Classification

EPB-TBM cutterhead torque and thrust modelling in rock tunnels through an analytical method and TSFS model

Predicting tunnel boring machine penetration rate utilizing geomechanical properties

Semianalytical Analysis of Overexcavation and Critical Support Pressure for Support Design in TBM Tunneling through Squeezing Rock Condition

Actual performance analysis of a double shield TBM through sedimentary and low to medium grade metamorphic rocks of Ghomrood water conveyance tunnel project (lots 3 and 4)