Abstract:The chipping and grinding processes are the basis for understanding rock cutting during TBM excavation in hard rock conditions. The chips are produced when tensile fractures created by adjacent cutters propagate parallel to the tunnel face and coalesce whereas grinding occurs when fractures do not fully propagate through the rock and only fines are generated. Chipping is the normal and efficient boring process using machines equipped with disc cutters. Consequently, almost all of the models proposed for predicting the TBM penetration have been developed by the assumption that chipping is the dominant mode. It is obvious that these models are unable to predict correctly TBM performance when grinding is dominated in the rock cutting process. In this study, the relationships between engineering geological properties of the rock units (Cretaceous limestones) and operating and performance parameters of a refurbished EPB-TBM, employed for completion of SEL6 (the Southern Extension of Line 6, Tehran Metro) tunnel, were evaluated and analyzed. In this project due to limitations in the load capacity of the employed cutters and insufficient initial penetration in rock, the excavation was mostly carried out on grinding-dominated mode. So, the suitable data for establishing a special database and consequent analyses were provided. The established database composed of actual operating and performance parameters of the machine (i.e., cutterhead penetration and RPM and cutter load) and also engineering geological properties (i.e., UCS, alpha angle, GSI, and RQD) of limestone strata. Finally, by statistical analyses performed on collected and screened data (41 data sets), some simple, site-specific, empirical equations were developed to predict the TBM performance on grinding mode. In addition, according to the multivariate regression method, a significant relationship between the cutterhead penetration (PRev), the cutter load (Fn), intact rock strength (UCS), and geological strength index (GSI) was established, statistically. The obtained results demonstrate that this engineering geological-based model could provide a new applicable equation for accurately predicting TBM performance for similar geological conditions where grinding is dominant.

Studying the Effect of Tunnel Depth Variation on the Specific Energy of TBM, Case Study: Karaj–Tehran (Iran) Water Conveyance Tunnel

Application of the Cohesion Softening–Friction Softening and the Cohesion Softening–Friction Hardening Models of Rock Mass Behavior to Estimate the Specific Energy of TBM, Case Study: Amir–Kabir Water Conveyance Tunnel in Iran

Numerical Modeling of Soil and Structure Behavior for Tunneling in Different Types of Soil

TBM performance analysis in very strong and massive rocks; case study: Kerman water conveyance tunnel project, Iran

Identification and Optimization of Energy Consumption by Shield Tunnel Machines Using A Combined Mechanical and Regression Analysis

Predicting tunnel boring machine penetration rate utilizing geomechanical properties

Performance Evaluation of TBM Using an Improved Load Prediction Model

The energy method to predict disc cutter wear extent for hard rock TBMs

EPB-TBM cutterhead torque and thrust modelling in rock tunnels through an analytical method and TSFS model

Actual performance analysis of a double shield TBM through sedimentary and low to medium grade metamorphic rocks of Ghomrood water conveyance tunnel project (lots 3 and 4)

Evaluating the influence of engineering geological parameters on TBM performance during grinding process in limestone strata

Introduction of a modified QTBM model for predicting TBM penetration rate in rock, based on data from mechanized tunneling projects in Iran

TBM Tunneling Hazards Identification and Mitigation Methods Through Subterranean Rivers: An Evaluation of Nowsud Tunnel in the Iran

A new approach to evaluate the effect of over-boring and standstill time on thrust force of shielded TBMs based on penetration rate under squeezing conditions

Developing the Rule of Thumb for Evaluating Penetration Rate of TBM, Using Binary Classification

Evaluation of Hard Rock Tunnel Boring Machine (TBM) Performance Using Stochastic Modeling

A NEW MODEL FOR PREDICTING THE ADVANCE RATE OF A TUNNEL BORING MACHINE (TBM) IN HARD ROCK CONDITIONS

Geological–geotechnical risk in the use of EPB-TBM, case study: Tabriz Metro, Iran

Enhanced Theoretical Approach for Predicting the Tunnel Response Due to Deep Excavation Above

Evaluation and Optimization of the Effective Parameters on the Shield TBM Performance: Torque and Thrust—Using Discrete Element Method (DEM)

Analysis of rock cuttability based on excavation parameters of TBM