Abstract:The analysis of cutterhead torque and thrust force is of utmost importance in the selection of a proper tunnel boring machine (TBM) and in achieving optimal operation of the earth pressure balance (EPB) machine for a specific project. This study focuses on the analysis of cutterhead torque and thrust force using data collected from the recent metro project of Tehran, specifically the southern extension of Tehran metro line 6, (TML6-SE). To assess the impact of geotechnical and operational parameters on the measured torque and thrust, a database consisting of 457 data points was established. The excavation of a significant portion of the project took place in a dense and robust limestone using a refurbished EPB machine with a diameter of 9.19 m, initially designed for soft ground excavation. To complete this section of the tunnel, the cutterhead was equipped with disc cutters instead of rippers. Consequently, existing theoretical models for estimating torque and thrust of an EPB machine were modified to accommodate the hard rock boring process. Additionally, the Takagi-Sugeno fuzzy system (TSFS) was utilized in this study. The results of the models yielded quantitative conclusions, and the comparison between the measured and predicted target parameters demonstrated high accuracy. This study contributes to the understanding of the influence of various parameters on the performance of EPB machines in hard rock boring conditions, as well as providing insight into the potential adjustments needed in theoretical models for predicting cutterhead torque and thrust force. The proposed models showed satisfactory and reliable accuracy, with all models having an R2 value above 0.7 and loss function values nearing zero.

A NEW MODEL FOR PREDICTING THE ADVANCE RATE OF A TUNNEL BORING MACHINE (TBM) IN HARD ROCK CONDITIONS

Performance Prediction of Hard Rock TBM Based on Extreme Learning Machine

Performance Evaluation of TBM Using an Improved Load Prediction Model

Introduction of a modified QTBM model for predicting TBM penetration rate in rock, based on data from mechanized tunneling projects in Iran

Evaluation of Hard Rock Tunnel Boring Machine (TBM) Performance Using Stochastic Modeling

Predicting tunnel boring machine penetration rate utilizing geomechanical properties

Prediction of geological conditions for a tunnel boring machine using big operational data

A case study of tunnel boring machines advance rate prediction using meta-heuristic techniques

FUZZY LOGIC MODELLING TO PREDICT THE LEVEL OF GEOTECHNICAL RISKS IN ROCK TUNNEL BORING MACHINE (TBM) TUNNELLING

TBM performance analysis in very strong and massive rocks; case study: Kerman water conveyance tunnel project, Iran

Evaluation of TBM Cutter Wear in Naghadeh Water Conveyance Tunnel and Developing a New Prediction Model

Predicting advance rate and cutter life in TBM tunnelling using evolutionary algorithm

Supervised Machine Learning Techniques to the Prediction of Tunnel Boring Machine Penetration Rate

A case study of TBM performance prediction using field tunnelling tests in limestone strata

A mechanical method for predicting TBM penetration rates

Developing the Rule of Thumb for Evaluating Penetration Rate of TBM, Using Binary Classification

Advanced Prediction of Tunnel Boring Machine Performance Based on Big Data

Predicting the Performance of Tunnel Boring Machines using Big Operational Data

Tunnel Boring Machines (Tbm) Performance Prediction: A Case Study Using Big Data And Deep Learning

Enhanced Wear Prediction of Tunnel Boring Machine Disc Cutters for Accurate Remaining Useful Life Estimation Using a Hybrid Model

EPB-TBM cutterhead torque and thrust modelling in rock tunnels through an analytical method and TSFS model