Abstract:Purpose Near-surface mounted (NSM) fiber-reinforced polymer (FRP) rod is extensively applied in reinforced concrete (RC) structures. The mechanical performances of NSM FRP-strengthened RC structures depend on the bond behavior between NSM reinforcement and concrete. This behavior is typically studied by performing pull-out tests; however, the failure behavior, which is crucial to the local debonding process, is not yet sufficiently understood. Design/methodology/approach In this study, a three-dimensional meso-scale finite element method considering the cohesion and adhesion failures is presented to model the debonding failure process in pull-out tests of NSM FRP rod in concrete. The smeared crack model is used to capture the cohesion failures in the adhesive or concrete. The interfacial constitutive model is applied to simulate the adhesion failures on the FRP-adhesive and concrete-adhesive contact interfaces. Findings The present method is first validated by two simple examples and then applied to a practical NSM FRP system. This work studied in detail the debonding process, the bond failure types, the location of peak bond stress, the transmitting deformation in adhesive and the morphology of contact zone. The developed method provides a practical and convenient tool applicable for further investigations on the debonding mechanism for the NSM FRP rod in concrete. Originality/value A three-dimensional meso-scale finite element method considering the cohesion and adhesion failures is presented to model the debonding failure in NSM FRP-strengthened RC structures. The smeared crack model and the interfacial constitutive model are introduced to develop a convenient approach to analyze the failures in adhesive, concrete and related interfaces. The developed numerical method is applicable for studying the debonding process, the bond failure types, the location of peak bond stress, the transmitting deformation in adhesive and the morphology of contact zone in detail.

Measuring traction-separation relationships of bonded Fe-SMA double cantilever beam joints

Viscoelastic Bilinear Cohesive Model and Parameter Identification for Failure Analysis of Adhesive Composite Joints

Experimental study on bonding properties of Fe-SMA-to-steel bonded interface

Experimental and theoretical study on mechanical performance of Fe-SMA/steel single lap joints

Investigation on the Stable and Stick-Slip Crack Propagation Behaviors in Double Cantilever Beam Test

Investigation of traction-separation behavior in adhesively bonded joints under mode I and mode II loading using DIC technique and FEA

Modelling of Deformation and Failure of Crash Toughened Adhesive Bonded Lap Shear Joints

Fatigue Behaviors and Mechanism-Based Life Evaluation on SPR-bonded Aluminum Joint

Finite Element Modeling of Debonding Failure in CFRP-strengthened Steel Beam Using a Ductile Adhesive

Modeling of High Strength Steel Joints Bonded with Toughened Adhesive for Vehicle Crash Simulations

Nonlinear Semianalytical Prediction of Debonding at the FRP–Generic Material Interface with Mechanical End Anchorages

Analysis and design recommendations for structures strengthened by prestressed bonded Fe-SMA

Analysis of the adhesively bonded composite double cantilever beam specimen with emphasis on bondline constraint, adherend through-thickness flexibility and fracture process zone relative size

Measuring the interlaminar fracture toughness of thin carbon fiber/polyamide6 composites using adhesively bonded stiffeners

Numerical Modelling of Bond Behaviour Between Steel and CFRP Laminates with a Ductile Adhesive

Determination of fracture toughness of an adhesive in civil engineering and interfacial damage analysis of carbon fiber reinforced polymer–steel structure bonded joints

On the Intralaminar and Interlaminar Stress Analysis of Adhesive Joints in Plated Beams

An innovative wide-ranging analytical approach for modelling the bond behaviour of frp-to-substrate joints with an elastic end anchorage

Experimental Investigation of the Mechanical Behavior of Aluminum Adhesive Joints under Mixed-Mode Loading Conditions

Numerical simulation of the debonding process in pull-out tests of near-surface mounted FRP rod in concrete

Mode-II Fatigue Fracture of Bi-material Bonded Interfaces Using Tapered ENF Specimens