Abstract:A new discrete cohesive zone model (DCZM) is presented for modeling the interface behavior of adhesive-bonded thin laminates and sandwich panels. The proposed model treats the interface as a spring element and the adherent as a beam element. The use of the preceding assumptions facilitates the simplification of the computational framework reducing the problem from a 2D to 1D, thereby relaxing the requirements of maintaining the aspect ratio of elements in the finite element mesh. For thin laminates, the constitutive relation of the adhesive is represented by a bi-linear traction-separation law, whereas for sandwich panels, an exponential law is employed to model the adhesive behavior. In order to validate the proposed model for thin laminates, simulations of three established fracture tests: DCB, ENF, and MMB have been undertaken. Additionally, for the sandwich panel, two experiments documented in the literature have been simulated for assessing the efficacy of the modelling. One experiment has a mode-I interface failure and the other one a mode-II interface failure between the core and skin. It has been observed that the model is not sensitive to either the element size or the load step size. The results have been compared with reported (benchmark) numerical, analytical, and experimental findings. The proposed methodology for thin laminates offers a significant reduction in the computational effort (reduced number of unknown degrees of freedom compared to existing methods) with no compromise on the accuracy of the predictions. Specifically, it reduces the unknown degrees of freedom by more than 25\% compared to the corresponding mesh used in existing continuum cohesive zone model (CCZM) approaches. The Newton-Raphson solver can achieve quick convergence and no line search feature is required. The proposed algorithm is easy to implement on any computational platform.

Investigation of traction-separation behavior in adhesively bonded joints under mode I and mode II loading using DIC technique and FEA

Viscoelastic Bilinear Cohesive Model and Parameter Identification for Failure Analysis of Adhesive Composite Joints

Evaluation of the cracked lap shear test for mixed-mode fracture toughness estimation of adhesive joints

Experimental characterization of traction-separation laws for interlaminar fracture in geometrically-scaled composites using progressive digital image correlation and through-thickness deformation analysis

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Dynamic fracture response of adhesive joints subjected to mode-I impact wedge loading

Measuring traction-separation relationships of bonded Fe-SMA double cantilever beam joints

Estimation of CZM Parameters for Investigating the Interface Fracture of Adhesively Bonded Joints Under Mode I, Mode II, and Mixed‐Mode (I/II) Loading

Analysis of the adhesively bonded composite double cantilever beam specimen with emphasis on bondline constraint, adherend through-thickness flexibility and fracture process zone relative size

Experimental and numerical investigation on test methods for mode II fracture of composite‐titanium adhesively bonded structures

Finite Element Analysis of Crack Propagation in Adhesive Joints with Notched Adherends

Determination of Interface Fracture Toughness of Adhesive Joint Subjected to Mixed-Mode Loading Using Finite Element Method

Investigations on the energy balance in TDCB tests

Fracture energy and cohesive law analysis of adhesives using a recently developed SCB joint: The influence of joint geometry and mode mixity

On the Fracture Resistance of Adhesively Jointing Structures

Estimation of fracture behavior of CFRP/CFRP adhesively bonded joints under mixed-mode conditions using a cohesive zone model

Influence of Loading Rate on the Cohesive Traction for Soft, Rubber-like Adhesive Layers Loaded in Modes I and III

A discrete cohesive zone model for beam element: Application to adhesively bonded laminates and sandwich panels

A Calculation Method for the Mode II Fracture Energy Release Rate of Dissimilar Materials Adhesively Bonded Structures

Measurement of Slip and Separation in Jointed Structures with Non-Flat Interfaces

Assessing critical fracture energy in mode I for bonded composite joints: A numerical–experimental approach with uncertainty analysis