Investigation of CFRP damages induced by the interface high temperature and mixed tool wear mechanism in drilling of thin-walled CFRP /Ti stacks

Sipeng Cao,Yuan Li,Kaifu Zhang,Guoyi Hou,Bin Luo,Shunuan Liu,Tengfei Long,Ping Liu

DOI: https://doi.org/10.1016/j.compstruct.2023.117438

IF: 6.3

2023-08-16

Composite Structures

Abstract:Due to the poor thermal conductivity and machinability of CFRP and Ti6Al4V, significant heat accumulation at the interface and rapid tool wear are considered the main factors restricting the hole quality. This study conducted a thin-walled CFRP/Ti stack drilling experiment to investigate the evolution of the thrust force, temperature and tool wear versus different drilled hole numbers and spindle speeds, affected by which the novel material removal behavior was revealed. Results showed that the thrust force and interface temperature increased with the hole number and spindle speed, causing a significant increase in the cutting edge rounding and flank face wear dominated by the many fiber bundles and metal debris. In turn, the various tool wear led radial interface temperature to alternately transfer between Φ = 45° and 135°. Under the cyclic thermo-mechanical function, the fibers underwent significant bending deformation as they lost the support of the degenerated matrix resin, forming severe subsurface damage when the interface temperature exceeded the matrix glass transition temperature ( T g =110°C). Combined with the comprehensive evaluation of exit damages, a relatively higher spindle speed was preferred for selecting the initial drilling of thin-walled CFRP/Ti stack and gradually reducing the spindle speed with increasing tool wear extent.

mechanics,materials science, composites