Abstract:Currently, domestic and foreign copper smelting waste acid mainly employ sulfuration method to realize the separation of Cu(II) and As(III), facing the problem of unreasonable sulfidizing agent dosage and sulfidation time. If excessive sulfidizing agent dosage or overly long sulfidation time, it will lead to human health threat and large hazardous waste volume. If insufficient sulfidizing agent dosage or overly short sulfidation time, it will cause the waste of copper resources and substandard treatment solution. In this paper, the competitive sulfuration mechanism of Cu(II)/As(III) solution ( C (As(III)) = 10 g/L) with different Cu(II) concentrations is revealed, i.e., when C (Cu(II)) ≥7 g/L, the sulfidation sequence of Cu(II) and As(III) follows the solubility product constant (Ksp); when C (Cu(II)) ≤6 g/L, the precipitation process of Cu(II)/As(III) is dominated by the liquid-phase mass-transfer mechanism (ion diffusion). The sulfide precipitation of Cu(II)/As(III) is a co-deposition process. With the increase of sulfidizing agent dosage ( S/Cu ratio) and sulfidation time ( t ), the Cu(II) concentration gradually decreases to reach complete removal, while the further increase of S/Cu ratio and t leads to the decrease of copper content in the sulfide precipitates. Finally, the methods are demonstrated that detected accurately Cu(II) and As(III) concentrations in a rapid and non-destructive manner. This work not only provides a novel perspective on the efficient separation of Cu(II)/As(III) in copper smelting waste acid, but also opens a unique approach for direct and rapid detection of Cu(II)/As(III) concentration during the sulfuration process. Hence, this research is a guide for the regulating means ( S/Cu and t ) in the actual multi-step sulfuration process of copper smelting waste acid treatment and electrorefining solution purification.

Ultrasonic-enhanced selective sulfide precipitation of copper ions from copper smelting dust using monoclinic pyrrhotite

Study on the mechanism of copper and arsenic separation in copper smelting acidic solution by arsenic sulfide residue

Efficient removal of As, Cu and Cd and synthesis of photo-catalyst from Cu-smelting waste acid through sulfide precipitation by biogenic gaseous H2S produced by anaerobic membrane bioreactor

Efficient recovery of copper resources from copper smelting waste acid based on Cu(II)/As(III) competitive sulfuration mechanism

Selective Recovery of Copper from Acid Leaching Solution through Slow Release Sulfide Precipitant

Experimental and simulation studies of metal sulfide precipitates separation in copper smelting waste acid using a gravitation field-flow fractionation method

Selective separation of metals from wastewater using sulfide precipitation: A critical review in agents, operational factors and particle aggregation

Recovery of Copper, Lead, Zinc, and Arsenic from Copper Smelting Dust by Oxidative Alkaline Leaching and Sulfide Precipitation

Recycling Cu(II) from complexing copper wastewater using ferrous sulfide stabilized by carboxymethyl cellulose: efficiency and mechanism insights

Co-treatment of copper smelting flue dust and arsenic sulfide residue by a pyrometallurgical approach for simultaneous removal and recovery of arsenic

Enhancement of copper metal dissolution in sulfuric acid solution with oxygen and ultrasound

Kinetics and mechanistic aspects of removal of heavy metal through gas-liquid sulfide precipitation: A computational and experimental study

Ultrasonic pretreatment for enhancing flotation separation of elemental sulfur and silver-bearing lead minerals from an oxidative pressure leaching residue of zinc sulfide

Comprehensive recovery of arsenic and antimony from arsenic-rich copper smelter dust

Efficient in Situ Utilization of Caustic for Sequential Recovery and Separation of Sn, Fe, and Cu in Microbial Fuel Cells

Selective Recovery of Copper from a Synthetic Metalliferous Waste Stream Using the Thiourea-Functionalized Ion Exchange Resin Puromet MTS9140

Preparation of Modified Manganese Slag Slurry for Removal of Hydrogen Sulphide and Phosphine

Removal of SO2 from Smelting Flue Gas by Using Copper Tailings with MnSO4: Factors Optimization by Response Surface Methodology

Production of H2S with a Novel Short-Process for the Removal of Heavy Metals in Acidic Effluents from Smelting Flue-Gas Scrubbing Systems

Efficient heterogeneous precipitation and separation of iron in copper-containing solution using dolomite

Preparation of copper-based catalysts from electroplating sludge by ultrasound treatment and their antibiotic degradation performance