Abstract:Biomass is a green source of power since it has minimal to no impact on biodiversity and offers global security for ecological sustainability. Gasification is a thermochemical procedure that turns a source into a by-product (fuel gas). Biomass has an edge over carbon fuels because it is sustainable. It acts as a steady source of feedstock and works as a viable candidate for energy production because it is sustainable. A few other negative repercussions of their extraordinary use include the persistent unpredictability of demand and supply for fossil fuels, environmental harm, and the consequences of climate change. Different factors, such as temperature, particle size, biomass composition, gasifier design, operating conditions, etc., have an impact on a biomass gasifier's efficiency. During gasification, a number of simultaneous reactions actually happen, and some components can serve as both reactants and products. We are reporting for the first time the optimization of biomass mixture (sugarcane bagasse and sawdust) along with equivalence ratio and air flow rate. Preliminary experiments were conducted to ascertain the range and levels of operations of three factors, such as equivalence ratio (ER), air flow rate, and biomass ratio. Optimization involving Box-Behnken design was utilised to decipher the effect of three influencing parameters such as biomass mixture of sugarcane bagasse and sawdust (25%, 50%, and 75%); low air flowrates (10.5, 13.0, and 16.5 L/hr) and equivalency ratios (0.2, 0.3, and 0.4) on gas yield, tar yield, and gas heating value of biomass using an Intrinsic circulating fluidized-bed reactor. All stochastic parameters validated our model. An optimal gas yield, tar yield, and gas heating value of 1.881 Nm3/Kg, 11.360, and 8.188 were predicted at an equivalence ratio (ER) of 0.3, air flow rate of 16.5 L/h, and biomass ratio of 0.75 (75% sugarcane bagasse to 25% sawdust ratio) at a desirability of 1.00. The experimental values were found to be: gas yield (1.867 Nm3/Kg), tar yield (14.0 g/Nm3), and gas heating value (8.15 MJ/Nm3). Trialswere conducted in-order to warrant the predicted circumstancesand the results were found to be correlated with experimental values. Keywords Gasification, gas yield, tar yield, gas heating value, biomass combination.

CO 2 conversion to CO by fluidized bed biomass gasification: Analysis of operational parameters

Biomass gasification with CO2 in a fluidized bed

Effects of operating conditions and reactor structure on biomass entrained-flow gasification

Characteristics of Coal Partial Gasification Experiments on a Circulating Fluidized Bed Reactor under CO2-O-2 Atmosphere

CO2 Conversion by Oxygen-Enriched Gasification of Wood Chips

Comparison of Gasification Performances Between Raw and Torrefied Biomasses in an Air-Blown Fluidized-Bed Gasifier

A novel system of biomass for the generation of inherently separated syngas by combining chemical looping CO2-gasification and steam reforming process

Biomass CO2 Gasification with CaO Looping for Syngas Production in a Fixed-Bed Reactor

High-fidelity investigation of thermochemical conversion of biomass material in a full-loop circulating fluidized bed gasifier

CFD simulation of a fluidized bed reactor for biomass chemical looping gasification with continuous feedstock

Experimental demonstration of 80 kWth chemical looping combustion of biogenic feedstock coupled with direct CO2 utilization by exhaust gas methanation

An Experimental And Response-Surface-Based Optimization Approach Towards Production Of Producer Gas In A Circulating Fluidized Bed Gasifier Using Blends Of Renewable Fibre-Based Biomass Mixtures

CFD Modeling of Sawdust Gasification in a Lab-Scale Entrained Flow Reactor Based on Char Intrinsic Kinetics. Part 2: Parameter Study and Multi-Objective Optimization

CO 2 utilization in chemical looping gasification and co-gasification of lignocellulosic biomass components over iron-based oxygen carriers: Thermogravimetric behavior, synergistic effect, and reduction characteristics

Experimental and simulation studies of oxygen-blown, steam-injected, entrained flow gasification of lignin

CO 2 recycling using sodium aluminate impregnated corn stover char gasification

Flue gas analysis for biomass and coal co-firing in fluidized bed: process simulation and validation

CO2-gasification of a lignite char in a micro-fluidized bed thermogravimetric analysis (MFB-TGA) for chemical looping combustion and chemical looping with oxygen uncoupling (CLC/CLOU)

Biomass Hydrothermal Conversion under CO2 Atmosphere: A Way to Improve the Regulation of Hydrothermal Products.

Boosting the Conversion of CO2 with Biochar to Clean CO in an Atmospheric Plasmatron: A Synergy of Plasma Chemistry and Thermochemistry

Gaseous Production Kinetics and Solid Structure Analysis During Isothermal Conversion of Biomass Pellet under Different Atmospheres