Abstract:Abstract To explore the opportunity for maximum utilization for one of gas processing facilities in line with ADNOC strategy to enhance profitability and asset utilization. A Technical study was conducted to increase the processing capacity up to 115% of its design limit. This was to identify the potential bottlenecks in the facility and suggest debottlenecking options with a reasonable investment. The Technical study covers the following activities: Rigorous process simulation including the licensor units of NGL & AGRU.Line sizing adequacy check and detailed hydraulic evaluation of the major piping.Equipment adequacy check.Relief & blowdown and flare system adequacy check.Proprietary equipment/design evaluation of licensed units.Adequacy check for In-line instruments like control valves, flow elements/transmitters, ThermowellsRotating equipment adequacy checks performed with the concurrence from OEMs.Obtained Endorsement of NGL licenser (Ortloff) for the methodology of 115% adequacy check, with a recommendation to gradually increase the plant rate in 1% at a time and monitor the performance until achieving the required targetRisk assessment was conducted before the capacity testActual plant capacity test run to verify the study findings. The study has concluded the following observations for processing 115% of the design capacity: High flow alarms set points need to be changed at some locations due to increase gas flow rates.550 oo 1133 of thermowell are not adequate based on new design CODE. These thermowells are to be replaced for the continuous operation.6 Filters to be upgraded with required capacity. A Successful two days Test-run was conducted in June 2018 and there are no additional limitations identified other than identified in the study. Following are the outcome. Reduction of the C2 recovery by 1.2 % with no significant change in C3 recovery level.Increase in Residue Gas by 30 MMSCFD per trainIncrease in NGL by 235 TPD per trainIncrease in condensate by 2100 BPD per train Overall Product wise revenue per train was identified at a sum of 62.5 MMUSD/Y.

Parametric study and optimization of an acid gas enrichment plant with outlet streams and energy usage consideration

Reconfiguration of Acid Gas Removal Process Matching the Integration of Coal Chemical Industry with Green Hydrogen

Effect of acidic products from degradation of N-methyldiethanolamine amine on CO2/H2S capturing from natural gas

Simulation of Natural Gas Treatment for Acid Gas Removal Using the Ternary Blend of MDEA, AEEA, and NMP

Simulation and Optimization of the Acid Gas Absorption Process by an Aqueous Diethanolamine Solution in a Natural Gas Sweetening Unit

Effect of Solvent Concentration on the Energy Demand of an Absorption-Based Natural Gas Sweetening Plant

Optimization of Post Combustion CO2 Capture from a Combined-Cycle Gas Turbine Power Plant via Taguchi Design of Experiment

Efficiency, Economic, Energy, and Safety (3ES) Analyses on Different Configurations of MDEA Absorption Process for Coke Oven Gas Desulfurization

Performance and Optimization of Integrated Biogas Bio-desulfurization Reactor

Energy, exergy, economic, environment, exergo-environment based assessment of amine-based hybrid solvents for natural gas sweetening

Energy Minimization in Piperazine Promoted MDEA-Based CO2 Capture Process

Investigation of Decomposition and Partial Oxidation of Mixed Acid Gas and Methane for Syngas Production

Design of CO2 absorption plant for recovery of CO2 from flue gases of gas turbine

A study to reduce atmospheric emissions of an existing natural gas dehydration plant using multiple thermodynamic models

Carbon Capture and Storage Energy Consumption and Performance Optimization Using Metamodels and Response Surface Methodology

High Yield of CO and Synchronous S Recovery from the Conversion of CO 2 and H 2 S in Natural Gas Based on a Novel Electrochemical Reactor

A multiobjective experimental based optimization to the CO2 capture process using hybrid solvents of MEA-MeOH and MEA-water

Exergoenvironmental Analysis and Thermoeconomic Optimization of an Industrial Post-Combustion CO2 Capture and Utilization Installation

Advanced Rectisol wash equipment incorporating syngas liquefaction and methane recovery for enhanced energy management

Data Analysis in Green Industrial Processes with Modified Chemical Efficiency and Environmental Impact: Smart Urea Production and CO2 Removal

Enhance the Operating Capacity - Maximize the Revenue