Abstract:Coal and electricity integration plays an important role in ensuring national energy security, but it still faces the challenge of carbon emission reduction. The development of in-situ CO 2 sequestration and utilization technology for pithead power plants is an effective way to achieve low-carbon and efficient utilization of coal power. The preparation of foam concrete for mining using CO 2 is a type of carbon capture, utilization, and storage technology featuring in-situ CO 2 sequestration and utilization in pithead power plants and mine filling and sequestration. The purpose of this study is to evaluate the basic performance and carbon sequestration potential of Portland cement-based CO 2 foam concrete (PC-CFC) as a mining material. In this study, PC-CFC was prepared through physical foaming and the carbonation pretreatment cement process. The influence of carbonation pretreatment time and CO 2 foam content on density, strength, and carbon sequestration of PC-CFC was investigated. The experimental results showed that carbonation pretreatment could enhance the stability of CO 2 foam in Portland cement and improve the CO 2 foaming performance. With the extension of carbonation pretreatment time, the extend of dry density reduction decreases from 16.6% to 0.8%. A 60 min–90 min of carbonation pretreatment can achieve the best treatment performance. Carbonation pretreatment and CO 2 foam can promote the degree of cement hydration, optimize the PC-CFC pore structure, and improve the compressive strength of PC-CFC. However, the PC-CFC material strength owing to the extended carbonation treatment time, which leads to well-developed vesicle distribution, has an overall decreasing trend. In addition, the 7 day (d) compressive strength of PC-CFC can reach more than 60% of the 28 d compressive strength, which has evident early strength characteristics. Extending the carbonation pretreatment time and CO 2 foam content increased the PC-CFC carbon sequestration that ranged from 61.0 kg/ton to 85.7 kg/ton. The dry density of the PC-CFC material was significantly and positively correlated to the 28 d compressive strength and negatively correlated to the amount of carbon sequestration. In the case in which the best carbon sequestration effects is achieved, a single filling of the working face end can store ∼3929.31 kg of CO 2 ; in the most economical condition, it can store ∼3642.79 kg of CO 2 . The conducted research provides new ideas for the low-carbon and green development of coal and electricity integration.

Sol–gel-stabilized CO2 foam for enhanced in-situ carbonation in foamed fly ash backfill materials

Expansion Properties of Cemented Foam Backfill Utilizing Coal Gangue and Fly Ash

Preparation and Performance of a Low-Carbon Foam Material of Fly-Ash-Based Foamed Geopolymer for the Goaf Filling

CO2 in water foam stabilized with CO2-dissolved surfactant at high pressure and high temperature

Preparation of slag-based foam concrete and its carbon dioxide sequestration performance

The CO2-in-water foam stabilized with the mixture of CO2-soluble surfactant and nonionic surfactant

Effect of carbonation and foam content on CO 2 foamed concrete behavior

Ultra-stable foam enabled by nano silica engineering for foam concrete improvement

Activation behavior of the novel CO 2 foaming agent for mining on fly ash

Foam Stabilization Process for Nano-Al2O3 and Its Effect on Mechanical Properties of Foamed Concrete

A backfill material without cementitious material: Carbonation curing magnesium slag based full solid waste backfill material

Preparation of foam concrete from solid wastes: Physical properties and foam stability

CO2/N2 switchable aqueous foam stabilized by SDS/C12A surfactants: Experimental and molecular simulation studies

CO2-Soluble Ionic Surfactants and CO2 Foams for High-Temperature and High-Salinity Sandstone Reservoirs

Strength characteristics and carbonation depth evolution of modified magnesium slag based solid waste storage backfill materials

Strategy to Enhance Geological CO2 Storage Capacity in Saline Aquifer

Preparation and Properties of Foam Concrete Incorporating Fly Ash

Application of CO 2 -foamed lightweight grout with early strength and low density as a low-carbon material in shield synchronous grouting

Preparation of styrene‐phenylamine monomer copolymer nanospheres and its performance for stabilizing CO2 foam

Experimental study on the macroscopic and microscopic properties of cement paste backfill after treatment with carbon dioxide carbonize filling slurries during the mixing process

Innovative use of solid CO2 as an eco-friendly additive in alkali-activated concrete for enhancing its performance