Abstract:The technology of carbon capture, utilization, and storage (CCUS) is an important component of carbon neutral technology systems. To confirm the carbon storage potential of CO2 foamed concrete (CFC), this study addressed the principle of carbon storage in CFC materials. It is apparent that carbon storage of CFC materials includes carbon fixation in concrete skeletons and carbon storage in CFC bubbles. The carbon fixation of CFC skeletons is realized by CO2 mineralization. As the concrete skeleton in CFC is in the CO2 atmosphere, the carbonation of CFC materials or CO2 mineralization is more complete. Research shows that the carbonation rate of CFC materials can reach almost 30% after acidification, foaming with high CO2 pressure and curing in the atmosphere. The carbonation rate is higher than the rate in concrete curing with CO2. A mathematical model was established to calculate carbon fixation capacity in CFC materials, and the carbon fixation and storage capacity in CFC material were estimated. The results showed that more than 99% carbon storage of CFC was realized by the chemical carbonization of the concrete skeleton. Comparatively, the potential of carbon storage in the bubble of CFC was small. In this study, carbon storage capacity was divided into three categories, i.e., theoretical maximum capacity, relative reliable capacity, and expected capacity or potential. The carbonation rate for theoretical maximum capacity was 100%, when all the concrete was considered to be carbonated. As the carbonation rate of concrete during the whole life cycle is approximately 55% all over the world, 50% was set as the carbonation rate for relative reliable capacity calculation. If at high temperatures, CO2 curing with high pressure or accessory ingredients applied to silicate concrete can improve carbonation rate to be over 80%, when the carbon storage capacity is considered to be expected capacity or potential. In 2017-2021, the theoretical maximum capacity of carbon storage was 3.623×109 t CO2 in China, with 7.25×108 t·a-1. The relative reliable capacity was 3.75×108 t·a-1, and the expected capacity was 5.80×108 t·a-1. If the carbonation rate was 30%, the carbon storage of concrete produced annually in China during the whole life cycle reached 2.18×108 t, which was more than the carbon sink of Daxing'anling forest for one year. In coal electricity integrated mining areas and large thermal, metallurgical, cement chemical, and other high-energy consuming enterprises, CFC has a good prospect of development to promote the recycling of solid waste and waste gas. Meanwhile, it is pointed out that the stability of CFC before solidification is a technical problem to be solved in the next step.

Effect of carbonation and foam content on CO 2 foamed concrete behavior

Study on Preparation and Performance of CO2 Foamed Concrete for Heat Insulation and Carbon Storage

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Carbonation Curing of Industrial Solid Waste‐based Aerated Concretes

Enhanced Carbonation Curing of Cement Pastes with Dolomite Additive

Accelerated Carbonation of Biochar Reinforced Cement-Fly Ash Composites: Enhancing and Sequestering CO2 in Building Materials

Mechanism Underlying Early Hydration Kinetics of Carbonated Recycled Concrete Fines-Ordinary Portland Cement (CRCF-OPC) Paste

Study on Carbon Fixation Ratio and Properties of Foamed Concrete

[Analysis of Carbon Storage Potential of CO2 Foamed Concrete]

Preparation of slag-based foam concrete and its carbon dioxide sequestration performance

Expansion Properties of Cemented Foam Backfill Utilizing Coal Gangue and Fly Ash

Experimental study on the macroscopic and microscopic properties of cement paste backfill after treatment with carbon dioxide carbonize filling slurries during the mixing process

An Overview on the Influence of Various Parameters on the Fabrication and Engineering Properties of CO2-cured Cement-Based Composites

An overview of utilizing CO2 for accelerated carbonation treatment in the concrete industry

Experimental study on the physico-mechanical properties and microstructure of foam concrete mixed with coal gangue

CO2 Pretreatment to Aerated Concrete with High-Volume Industry Wastes Enables a Sustainable Precast Concrete Industry

Carbon dioxide as an admixture for better performance of OPC-based concrete

Effect of Mixing and Curing System on Carbon Fixation Amount and Performance of Circulating Fluidized Bed Fly Ash Cement Cementitious Material System

Performance Study of Foam Concrete Prepared by the Synergistic Utilization of Agricultural Waste and Coal Gangue Based on Double Orthogonal Experiments

Performance Assessment of Carbon Dioxide Sequestration in Cement Composites with a Granulation Technique

Effect of Carbonation Treatment on the Strength and CO2 Uptake Rate of Composite Cementitious Material with a High Steel Slag Powder Content