Abstract:Abstract Chemical flooding technique is one of effective EOR (Enhanced Oil Recovery) ways to improve the oil recovery for mature oilfield in China. It is usually applied successfully in low temperature and low salinity sandstone reservoirs, such as Daqing oilfield (45°C, 5,100 mg/L) and in Changqing oilfield (50°C, 4,700 mg/L). However, it is great challenges to develop chemical EOR formulations for the high temperature and high salinity carbonate reservoir. On the one hand, the high temperature and high salinity condition may cause decomposition of the conventional chemical agents with poor long-term stability. On the other hand, the oil types and compositions, rock surface property and pore structure are all different for sandstone and carbonate reservoirs. Therefore, it is necessary and important to development low cost and high efficiency chemical formulations for high temperature and high salinity carbonate reservoirs. In this paper, the betaine surfactant has been synthesized with cheap raw material of fatty acid, and its functional group of hydroxyl propyl sulfo hydrophilic group can improve the heat resistant and salt tolerant abilities; the star-polymer has been developed and the introduction of multi-functional monomer can inhibit the hydrolysis at high temperature and high salinity conditions. The new SP and ASP chemical formulations have been developed, and show good properties for high temperature and high salinity carbonate reservoir. The SP chemical formulations of the betaine and star-polymer show good heat resistant and salt tolerant capability. It could achieve ultra-low interfacial tension (less than 1.0×10-2mN/m) with temperature range from 30°C to 95°C, or salinity range from 5,000 mg/L to 220,000 mg/L.The effect of alkalis on interfacial tensions were studied, including Na2CO3, Na2SiO3, Na3PO4 and Na2B4O7. The ASP combination formulas with Na2B4O7 showed the best interfacial properties.The SP and ASP chemical formulations had good long term stability, and could maintain ultra-low IFT within 180 days, and the viscosity retention rates were greater than 90%.The dynamic adsorptions of this betaine were less than 1.0 mg/g rock, which can meet the requirement of field applications.After water flooding, the oil recoveries of the SP and ASP formulations increased about 22% (OOIP, Original Oil In Place) and the oil displacement efficiencies of chemical combination flooding reached to 75%. Excellent properties of chemical formulations with the sulfobetaine and star-polymer indicate that this EOR technology can be applied in high temperature and high salinity carbonate reservoir with or without alkaline.

CO2-Soluble Ionic Surfactants and CO2 Foams for High-Temperature and High-Salinity Sandstone Reservoirs

Effect of Salinities on Supercritical CO2 Foam Stabilized by a Betaine Surfactant for Improving Oil Recovery

CO2 in water foam stabilized with CO2-dissolved surfactant at high pressure and high temperature

CO2 Foamed Viscoelastic Gel-Based Seawater Fracturing Fluid for High-Temperature Wells

Surfactant and a mixture of surfactant and nanoparticles to stabilize CO2/brine foam, control gas mobility, and enhance oil recovery

Research of CO2-Soluble Surfactants for Enhanced Oil Recovery: Review and Outlook

A Novel Supercritical CO2 Foam System Stabilized With a Mixture of Zwitterionic Surfactant and Silica Nanoparticles for Enhanced Oil Recovery

Foaming supramolecular surfactants for gas mobility control in naturally fractured carbonate reservoirs at high temperature, salinity, and hardness

The evaluation of dodecyl hydroxy sulfobetaine as a high-temperature and high-salinity resistant foaming agent in sandstone reservoirs

Research on foaming agents for gas flooding in medium-temperature and high-salinity clastic reservoirs

Research on compound amidohydroxysulfobetaine foamer for high-temperature and high-salinity clastic reservoirs

Evaluation of a Nonionic Surfactant Foam for CO2 Mobility Control in a Heterogeneous Carbonate Reservoir

Static and dynamic foam/oil interactions: Potential of CO2-philic surfactants as mobility control agents

Adsorption behavior of in-house developed CO2-philic anionic surfactants

Study on Chemical Combination Formulations for High Temperature and High Salinity Carbonate Reservoirs

Interfacial properties and foam performance of alpha olefin sulfonate and CO2 switchable aminopropyl methyl siloxane surfactant mixtures

The CO2-in-water foam stabilized with the mixture of CO2-soluble surfactant and nonionic surfactant

Nanoparticle-Surfactant Stabilized Strong Foam for Enhanced Oil Recovery in High-Salinity Fractured Carbonate Reservoirs

Study on the Stabilization Mechanism of Wormlike Micelle-CO2 Foams in High-Temperature and High-Salt Oil Reservoirs

Experimental Investigation of Foam Flooding Using Anionic and Nonionic Surfactants: A Screening Scenario to Assess the Effects of Salinity and pH on Foam Stability and Foam Height

Development of surfactant formulation for high-temperature off-shore carbonate reservoirs