Abstract:The connection between the cleanliness of 52100 type bearing steels and their reliability has been well documented. Most research over the past 30 years has focused on sensitive compositional control during metallurgical refinement, leading to steels so clean that industrial cleanness standards are no longer suitable for quantifying further improvements. There is less literature, however, detailing the mechanism by which different impurities initiate rolling contact fatigue (RCF). Early work focused on comparing fatigue lives with cleanness ratings, which include a worst field analysis to determine the inclusion content and post-failure analysis to determine damage nucleation sites. The stress concentrations around discontinuities in the steel matrix can now however be visualised using computational modelling techniques. There is now a much clearer picture of how non-metallic inclusions (NMIs) nucleate fatigue damage by causing changes in the subsurface microstructure, including white etching regions in the form of butterflies. Size, morphology, distribution and type of inclusion are important factors for determining their role in RCF and the ability to control these variables could lead to improved performance. The inclusion character is greatly influenced by the steelmaking process, from initial melt through to casting, as well as hot deformation. While the impact of microchemical banding on RCF is not well understood, the effect of microsegregation on the phases that form can be modelled using simple calculations. Hot rolling techniques also influence the steel cleanliness, as NMIs can be plastically deformed or broken up and voids can be introduced around them, thus affecting the interface with the matrix. Understanding the microstructure evolution from materials characterisation and the ability to model the process could establish an optimum degree of rolling reduction. This could greatly aid the production of large bearings, as some manufacturers currently make them from very large ingots to achieve the necessary reduction ratio and therefore required level of performance.

A Comprehensive Model for Assessing the Impact of Steel Cleanliness on Bearing Performance

A Novel Machine-Learning Based Framework for Calibrating Micromechanical Fracture Model of Ultra-Low Cycle Fatigue in Steel Structures

Improving the reliability of highly loaded rolling bearings: the effect of upstream processing on inclusions

A New Proposed Weibull Distribution of Inclusion Size and Its Correlation with Rolling Contact Fatigue Life of an Extra Clean Bearing Steel

Model for dynamic characteristics produced by inner race local defect in ball bearing system and its simulation

Influence of Non-Metallic Inclusions on Very High-Cycle Fatigue Performance of High-Strength Steels and Interpretation via Crystal Plasticity Finite Element Method

Inclusion-Based Model: Calculating Tooth Root Bending Strength Considering Steel Cleanliness

Combined Influence Mechanism of the Flexible Free Outer Ring on Contact Characteristic in Heavy-Load Cam Roller Bearings

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Intelligent Design of Limit States for Recycled Aggregate Concrete Filled Steel Tubular Columns

Quantifying the Comprehensive Characteristics of Inclusion-Induced Defects Using an Integrated Destructive and Non-Destructive Method

Fatigue life and fatigue reliability mechanism of ball bearings

Wear behavior and damage characterization for AISI 52100 bearing steels: Effect of hardness and spherical carbides

Microstructural-based analysis of the unexpected differences in rolling contact fatigue behavior between SAE52100 and SAE4320

Effect of Primary Carbides on Rolling Contact Fatigue Behaviors of M50 Bearing Steel

A modified nonlinear fatigue damage accumulation model for life prediction of rolling bearing under variable loading conditions

Dynamic simulation of a cylindrical roller bearing with a local defect by combining finite element and lumped parameter models

Influence of trace rare earth elements on very high cycle fatigue behavior of hot rolled bearing steel

Finite Element Analysis of Roller Bearing Based on the Plastic Material Models

The Effect of Fit Clearance between Outer Race and Housing on Vibration Characteristics of a Cylindrical Roller Bearing with Localized Defects

Atomistic insights into friction and wear characteristics of M50 bearing steel: a molecular dynamics simulation study