Abstract:Capacitive sensors are efficient tools for biophysical force measurement, which is essential for the exploration of cellular behavior. However, attention has been rarely given on the influences of external mechanical and internal electrical interferences on capacitive sensors. In this work, a bionic swallow structure design norm was developed for mechanical decoupling, and the influences of structural parameters on mechanical behavior were fully analyzed and optimized. A bionic feather comb distribution strategy and a portable readout circuit were proposed for eliminating electrostatic interferences. Electrostatic instability was evaluated, and electrostatic decoupling performance was verified on the basis of a novel measurement method utilizing four complementary comb arrays and application-specific integrated circuit readouts. An electrostatic pulling experiment showed that the bionic swallow structure hardly moved by 0.770 nm, and the measurement error was less than 0.009% for the area-variant sensor and 1.118% for the gap-variant sensor, which can be easily compensated in readouts. The proposed sensor also exhibited high resistance against electrostatic rotation, and the resulting measurement error dropped below 0.751%. The rotation interferences were less than 0.330 nm and (1.829 × 10 −7 )°, which were 35 times smaller than those of the traditional differential one. Based on the proposed bionic decoupling method, the fabricated sensor exhibited overwhelming capacitive sensitivity values of 7.078 and 1.473 pF/μm for gap-variant and area-variant devices, respectively, which were the highest among the current devices. High immunity to mechanical disturbances was maintained simultaneously, i.e., less than 0.369% and 0.058% of the sensor outputs for the gap-variant and area-variant devices, respectively, indicating its great performance improvements over existing devices and feasibility in ultralow biomedical force measurement.

Capacitive Readout System for Micro Sensors and Actuators With Automatic Parasitic Cancellation

Fully Integrated Low-Noise Readout Circuit with Automatic Offset Cancellation Loop for Capacitive Microsensors

Digital Capacitance Measurement System Based on FPGA

A Novel Triangular-Electrode Based Capacitive Sensing Method for MEMS Resonant Devices

Reducing the Effect of Parasitic Capacitance on the Micro-capacitive Humidity Sensor

A low-power high-linearity symmetrical readout circuit for capacitive sensors

A Low-Noise Low-Offset CMOS Readout Circuit for MEMS Capacitive Accelerometers

Method of Eliminating Parasitic Capacitances in Micro Flow Measurement of MEMS Devices

A Capacitive Readout Circuit with DC Sensing Method for Micromachined Gyroscopes

Cmos Interface Circuitry For A Closed-Loop Capacitive Mems Accelerometer

Digital micro-capacitance measuring system and application

The Research on MEMS Micro Capacitance Sensor Detection Based on MS3110

A bionic approach for the mechanical and electrical decoupling of an MEMS capacitive sensor in ultralow force measurement

New Insights for Parasitic Effects of Label-Free Biosensors Based on Capacitive Micromachined Ultrasonic Transducers

A Flexible Capacitive Tactile Sensor Array with High Scanning Speed for Distributed Contact Force Measurements

A Digital-Analog Hybrid System-on-Chip for Capacitive Sensor Measurement and Control.

A Capacitance-To-Digital Converter for MEMS Sensors for Smart Applications

A 2.5 Mw 370 Mv/pf High Linearity Stray-Immune Symmetrical Readout Circuit for Capacitive Sensors

Design and realization of a capacitive sensor measurement system

Closed-loop Micro-Accelerometer Based on Capacitive Sensing Interface ASIC

A Low-Noise Closed-Loop Interface For High-G Capacitive Micro-Accelerometer