The role of the oxide layer in the corrosion of aluminium in acidic solutions

Kamil Dychtoń,Małgorzata Wierzbińska,Barbara Kościelniak,Andrzej Obłój,Marek Wojnicki,Przemysław Kwolek

DOI: https://doi.org/10.1002/maco.202313970

2024-01-09

Materials and Corrosion

Abstract:The aluminium oxide layer remains stable in hydrochloric and sulphuric acids and provides a certain protection against corrosion but is unstable in orthophosphoric acid at the open‐circuit potential (OCP). The mechanism of corrosion of aluminium in orthophosphoric acid includes adsorption of the reaction intermediate, presumably AlOH, on the surface of the corroding metal and the formation of the oxide layer at anodic potentials with respect to the OCP. The role of the oxide layer in the corrosion of aluminium in hydrochloric, sulphuric(VI) and orthophosphoric acid is studied at pH 1. The oxide layer is stable in hydrochloric and sulphuric acids. The corrosion rate of aluminium in these solutions is 0.2 and 0.3 mm/year, respectively. The oxide layer is unstable in orthophosphoric acid and the corrosion rate is higher, 1.75 mm/year. The corrosion process is studied using scanning electron microscopy, immersion and electrochemical techniques. The mechanism of corrosion of aluminium in the orthophosphoric acid solution is proposed. It includes the adsorption of a reaction intermediate on the surface of the corroding metal and the formation of the oxide layer at anodic potentials with respect to the open‐circuit potential. It is also explained when the inductive loop appears on the electrochemical impedance spectra of aluminium corroding in orthophosphoric acid solution. The mechanism of aluminium corrosion in hydrochloric and sulphuric acid is more complex compared to orthophosphoric acid, and is not analysed in detail.

materials science, multidisciplinary,metallurgy & metallurgical engineering