Abstract:Achieving high-efficiency thick-film bulk heterojunction (BHJ) organic solar cells (OSCs) with thickness-independent power conversion efficiencies (PCEs) in a wide thickness range is still a challenge for the roll-to-roll printing techniques. The concept of diluting the transport sites within BHJ films with insulating polymers can effectively eliminate charge trapping states and optimize the charge transport. Herein, we first adopted the concept with insulating polypropylene (PP) in the efficient non-fullerene system (PM6:Y6) and demonstrated its potential to fabricate thick-film OSCs. The PP can form an insulating matrix prior to PM6 and Y6 within the BHJ film, resulting in an enhanced molecular interaction and isolated charge transport by expelling Y6 molecules. We thus observed reduced trap state density and improved charge transport properties in the PP-blended device. At around 300 nm, the PM6:Y6:PP device enjoys a high PCE of 15.5% and achieves over 100% of the efficiency of the optimal thin-film device, which is significantly improved compared to the binary PM6:Y6 counterpart. This research promotes an effective strategy with insulating polymers and provides knowledge of commercial production with response to the roll-to-roll technique demands.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22452?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22452</a>.GIWAXS patterns for neat PP, PM6, and Y6 with different fractions of the PP film, active layer thickness atomic force microscopy, steady-state absorption spectra, optical microscopy images for the PP-modified blend, measurement of dissociation probability, TA spectra, <i>J</i>–<i>V</i> curves for electron/hole-only devices and OSC devices with various thicknesses, detailed data of dissociation probability, mobility, and device parameters, and fitted data by GIWAXS and TA (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22452/suppl_file/am0c22452_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Over 16% efficiency from thick-film organic solar cells

Over 18% Efficiency Ternary Organic Solar Cells with 300 nm Thick Active Layer Enabled by An Oligomeric Acceptor

Over 16% Efficiency of Thick‐Film Organic Photovoltaics with Symmetric and Asymmetric Non‐Fullerene Materials as Alloyed Acceptor

Thickness Insensitive Organic Solar Cells with High Figure‐of‐Merit‐X Enabled by Simultaneous D/A Interpenetration and Stratification

High Performance Solar Cell Based on Ultra-Thin Poly(3-Hexylthiophene): Fullerene Film Without Thermal and Solvent Annealing

Combination of Highly Photovoltaic and Highly Transparent Materials Enables Record Performance Semitransparent Organic Solar Cells

High‐Efficiency Organic Solar Cells with Wide Toleration of Active Layer Thickness

Self‐organized anode interlayer enables PEDOT: PSS free structure for thick‐film organic solar cells over 16% efficiency

High-Efficiency Thickness-Insensitive Organic Solar Cells with an Insulating Polymer

Vertically Optimized Phase Separation with Improved Exciton Diffusion Enables High-Efficiency Organic Solar Cells with Thick Active Layers

Single-Component Non-halogen Solvent-Processed High-Performance Organic Solar Cell Module with Efficiency over 14%

Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core

Vertically optimized phase separation with improved exciton diffusion enables efficient organic solar cells with thick active layers

Efficient Ternary Organic Solar Cells Enabled by the Integration of Nonfullerene and Fullerene Acceptors with a Broad Composition Tolerance

Non-fullerene acceptor fibrils enable efficient ternary organic solar cells with 16.6% efficiency

16% efficiency all-polymer organic solar cells enabled by a finely tuned morphology via the design of ternary blend

Surpassing 13% Efficiency for Polythiophene Organic Solar Cells Processed from Nonhalogenated Solvent

Over 17.6% Efficiency Organic Photovoltaic Devices with Two Compatible Polymer Donors

A Critical Review on Efficient Thick‐Film Organic Solar Cells

Homogeneous Grain Boundary Passivation in Wide‐Bandgap Perovskite Films Enables Fabrication of Monolithic Perovskite/Organic Tandem Solar Cells with over 21% Efficiency

Over 19% Efficiency Organic Solar Cells by Regulating Multidimensional Intermolecular Interactions