Abstract:As the device size continues to shrink, the gate oxygen layer in MOS devices continues to become thinner, which leads to problems such as increased leakage current in conventional Si MOS devices. SiC, an important semiconductor material used in high-power devices, is not immune to the problem of premature breakdown due to the gate oxygen layer. Based on this, this paper adopts the innovative approach of replacing the conventional SiO 2 as the gate oxygen layer with the high-k material, hafnium dioxide (HfO 2 ), and continues the in-depth study on the electrical characteristics of the gate oxygen structure. In this paper, hafnium dioxide (HfO 2 ) thin films were deposited on SiC and Si substrates using the atomic layer deposition(ALD) method. The metal-insulated semiconductor (MIS) structures with Al as the upper and lower electrodes were prepared, and the leakage currents and breakdown voltage characteristics of the MOS capacitors on the two different substrates were investigated. The leakage current density of the MOS capacitor structure with SiC substrate is 10 -11 A/cm 2 ,and the breakdown voltage is about 32 V. Based on the capacitance-voltage (C-V) measurements, the frequency dependence of the movable charge at the interface of the MOS capacitor structure is investigated. The lowest interfacial defect density (D it ) of the MOS capacitive structure with SiC substrate is only of the order of 10 10 eV -1 cm -2 , while the movable charge N eff of the oxide layer of this sample is also controlled to the order of 10 13 cm -2 . It is worth mentioning that the HfO 2 /SiC structure performs better than the HfO 2 /Si structure in these electrical parameters, and the sample designed in this paper also performs better in electrical parameters than previous studies. These results undoubtedly demonstrate that the combination of High-k material (HfO 2 ) and SiC in the MOS gate oxygen layer is a promising research topic.

High-k gate stack Hf x Ti1−x ON/SiO2 for SiC MOS devices

Improved high-field reliability for a SiC metal–oxide–semiconductor device by the incorporation of nitrogen into its HfTiO gate dielectric

Analysis of the Electrical Properties and Current Transportation Mechanism of a Metal Oxide Semiconductor (MOS) Capacitor Based on HfGdO Gate Dielectrics

Modification of Band Alignments and Optimization of Electrical Properties of Ingazno Mos Capacitors with High-K Hfoxny Gate Dielectrics

Interface Properties Study on SiC MOS with High-K Hafnium Silicate Gate Dielectric

Comparison of Microstructure and Electrical Characteristics of Sputtering-Derived HfGdO/HfTiO and HfTiO/HfGdO Gate Stacks

Microstructure, Optical and Electrical Properties of Sputtered HfTiO High-K Gate Dielectric Thin Films

Saturation Thickness of Stacked SiO2 in Atomic-Layer-deposited Al2O3 Gate on 4H-Sic

Electrical Characterization of HfO2/4H-SiC and HfO2/Si MOS Structures

High-K Gate Dielectric for High-Performance SiC Power MOSFET Technology with Low Interface Trap Density, Good Oxide Lifetime (ttddb≥ 104s), and High Thermal Stability (≥ 800 °C)

Multi-Layer High-K Gate Stack Materials for Low Dit 4H-SiC Based MOSFETs

Reliability characteristics of high-K gate dielectrics HfO2 in metal-oxide semiconductor capacitors

Reliability-aware design of metal/high-k gate stack for high-performance SiC power MOSFET

Interface Properties Study On Sic Mos With High-Kappa Al2o3 Gate Dielectric

Interface Properties Study on SiC MOS with High-Κ Al2O3 Gate Dielectric

Improved device characteristics obtained in 4H-SiC MOSFET using high-k dielectric stack with ultrathin SiO2-AlN as interfacial layers

High Quality Ultrathin Gate Dielectrics Prepared by In-Situ RTP

Comparative Study of TiO_2/SiO_2 and TiO_2/SiO_xN_y High-k Gate Dielectric Stacks

Design of Al2O3/LaAlO3/SiO2 Gate Stack on Various Channel Planes for High-Performance 4H-SiC Trench Power MOSFETs

Characterization of high-kappa nanolaminates of HfO2 and Al2O3 used as gate dielectrics in pMOSFETs

High- ${k}$ HfO 2 -Based AlGaN/GaN MIS-HEMTs with Y 2 O 3 Interfacial Layer for High Gate Controllability and Interface Quality