Abstract:The paper considers the features of structural transformations during annealing of the high-entropy alloy Al 0.3 CoCrFeNi. The ingots obtained by argon arc melting were subjected to cold rolling with a compression ratio of 50 %. The produced worpieces were annealed in the furnace for 4 hours at temperatures of 200, 400, 600, 800 and 1000 °C. The samples obtained by the described technique were examined using the methods of synchrotron X-ray diffraction in the lumen mode and diffraction of backscattered electrons. The research data indicate that up to a temperature of 600 °C, the structure of the alloys is represented by a single phase with a face-centered cubic lattice. When annealing alloys at temperatures of 800 and 1000 °C, the phase composition is characterized by the presence of two phases: a disordered phase with a face-centered cubic lattice and an ordered phase with a primitive cubic lattice. At temperatures above 800 °C, the burning of alloys is accompanied by development of recrystallization processes. It was found that after annealing at 800 °C, the relative proportion of micro-volumes characterized by inter-angular misorientation of more than 10° was 20 %, and after annealing at 1000 °C – 65 %. Microhardness of the studied samples increases with an increase in temperature up to 600 °C and decreases with a further increase in temperature. Analysis of the width of diffraction maxima using the methods of profile analysis of diffractograms indicates an increase in distortions of the crystal lattice of the ordered phase. This behavior may be associated with the release of nanoscale inclusions in the matrix of the main phase.

Kinetics and thermodynamics of thermally induced structural transformations of amorphous Fe75Ni2Si8B13C2 alloy

Mechanism and kinetics of crystallization of amorphous Fe81B13Si4C2 alloy

Kinetics and influence of thermally induced crystallization of Fe,Ni-containing phases on thermomagnetic properties of Fe40Ni40B12Si8 amorphous alloy

Corelation between the crystallisation process and change in thermoelectromotive force for the amorphous alloy Fe89.8Ni1.5Si5.2B3C0.5

The Crystallization Kinetics Study of Finemet-Co Amorphous Alloys

Kinetics and crystallization path of a Fe-based metallic glass alloy

Crystallization kinetics of Fe73.5Cu1.0Nb3.0Si13.5B9.0 amorphous alloys

Crystallization Kinetics and Martensitic Transformation of Ti49Ni46.5Ce4.5 Alloy Thin Film

Structure and phase transformations of amorphous-nanocrystalline Al-based alloy

Crystallization Behavior Of An Amorphous Fe44.6co17.4cr23b15 Alloy

Kinetics of SS-Phase Transformation in the Heat Treatment of FeSi2- and Fe2Si5-based Thermoelectric Alloys

Crystallization process and kinetics of SmCo/Fe and SmCo/FeCo partially crystallized amorphous alloys

Non-isothermal kinetic parameters and models of crystallization for amorphous Fe-Co-Nb-Cu-B alloys

The Amorphous-To-Nanocrystalline Transformation In Fe73.5cu1nb3si13.5b9 Studied By Thermogravimetry Analysis

Crystallization of Amorphous Zr60Al15Ni25 Alloy

Atomic level simulation of amorphous/nanocrystalline transition behavior in the Fe based amorphous alloys

Crystallization of Amorphous Alloy During Isothermal Annealing: a Molecular Dynamics Study

Amorphous-to-Cu51Zr14phase Transformation in Cu60Ti20Zr20alloy

Structural transformations during annealing of cold-worked high-entropy alloy Al0.3CoCrFeNi

Abnormal Crystallization Behavior of an (Al86ni9la5)(98)si-2 Amorphous Alloy

Non-isothermal Crystallization Kinetics of Zr41.2Ti13.8Cu12.5Ni10Be22.5 Amorphous Alloy