Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Microstructure and thermal stability of crystalline/amorphous Fe/FeW nanomultilayers

Atomic Scale Stability of Tungsten-Cobalt Intermetallic Nanocrystals in Reactive Environment at High Temperature.

Effect of Annealing on the Microstructure and Magnetic Properties of Fe-based Nanocomposite Materials

The Crystallization Kinetics Study of Finemet-Co Amorphous Alloys

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

Solid-state dewetting instability in thermally-stable nanocrystalline binary alloys

Amorphous complexions enable a new region of high temperature stability in nanocrystalline Ni-W

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Microstructural evolution of Cu/W nano-multilayers filler metal during thermal treatment

Atomic level simulation of amorphous/nanocrystalline transition behavior in the Fe based amorphous alloys

Nanostructure and compositional segregation of soft magnetic FeNi‐based nanocomposites with multiple nanocrystalline phases

Thermal stability of microstructures and mechanical properties in a Fe-based Fe-Cr-Mn-Cu-Mo multi-component alloy

Thermal Stability Comparison of Nanocrystalline Fe-Based Binary Alloy Pairs

Unraveling Thermodynamic and Kinetic Contributions to the Stability of Doped Nanocrystalline Alloys using Nanometallic Multilayers

Size-dependent microstructural evolution and mechanical properties of crystalline/amorphous high-entropy alloy nanostructured multilayers: Cu/FeCoCrNiBSi vs Ni/FeCoCrNiBSi

A Molecular Dynamics Study of Ag-Ni Nanometric Multilayers: Thermal Behavior and Stability

Mechanical Alloying, Fine Structure and Thermal Decomposition of Nanocrystalline Fcc-Fe60cu40

Extreme thermal stability in crystal-amorphous nanocrystalline CoCrFeMnNi high entropy alloy

The thermal stability and degradation mechanism of Cu/Mo nanomultilayers

Thermal stability of immiscible Cu-Ag/Fe triphase multilayers with triple junctions

Disordered interfaces enable high temperature thermal stability and strength in a nanocrystalline aluminum alloy