Abstract:The thermal hydraulic characteristics in the vacuum vessel (VV) of a fusion reactor under an ingress of coolant event (ICE) and a loss of vacuum event (LOVA) were investigated quantitatively using preliminary experimental apparatuses. In the ICE experiments, pressure rise characteristics in the VV were clarified for experimental parameters of the wall temperature and water temperature and for cases with and without a blowdown tank. In addition, the functional performance of a blowdown tank with and without a water cooling system was examined and it was confirmed that the blowdown tank with a water cooling system is effective for suppressing the pressure rise during the ICE. In the LOVA experiments, the saturation time in the VV from vacuum to atmosphere was investigated for various breach sizes and it was found that the saturation time is in inverse proportion to the breach size. In addition, the characteristics of exchange flow through breaches were clarified for the different breach positions on the VV. It was proven from the experimental results that the exchange flow became a counter-current flow when the breach was positioned on the top of the VV and a stratified flow when it was formed on the side wall of the VV, and that the exchange flow under the stratified flow condition was smoother than that of counter-current flow. On the basis of these results, the severest breach condition in ITER was changed from the top-break case to the side-break case. To predict with high accuracy the thermal hydraulic characteristics during ICEs and LOVAs under ITER conditions, a large scale test facility will be necessary. The current conceptual design of the combined ICE-LOVA test facility with a scaling factor of 1/1000 in comparison with the ITER volume is presented.

Completion of design and manufacturing of the iter vacuum vessel lower port extension

Design Evolution and Integration of the ITER In-Vessel Components

Concept Design of Fusion Power Shutdown System for ITER

Installation Progress of the Central Solenoid (CS) on ITER Site

Progress of ITER Procurement in China

ITER blanket engineering challenges and solutions

China’s Technological Achievements on ITER Enhanced Heat Flux First Wall in the Pre-Pa Qualification

The diagnostic rack design and the functional demonstration of the locking mechanism for ITER diagnostic lower port integrations

Completion and Factory Acceptance Test of ITER PF1 Coil

R&D achievements for vacuum vessel towards CFETR construction

Fusion Safety Experiments in Jaeri

Toward Completion and Delivery of the First EU ITER Magnets

Proposal of Integrated Test Facility for in-Vessel Thermofluid Safety of Fusion Reactors

Key technologies of manufacturing and testing for the ITER blanket shield block

Full Scale Prototype Research and Development of the Iter Pf Converter Unit

Thermal Hydraulic Characteristics During Ingress of Coolant and Loss of Vacuum Events in Fusion Reactors

Design and vibration test of first mirror mount assembly for ITER divertor VUV spectrometer

Completion of all the ITER toroidal field coil structures

Design and analysis of the Agile Robot Transporter for ITER in-vessel maintenance

Final Design of ITER In-Vessel Coils and Manufacturing of In-Vessel Coil Conductor

Design and Development of Turn Insulation Automatic Wrapping System for CRAFT TF