Abstract:Abstract Gas turbines and aircraft engines are dominated by cyclic operating modes with fatigue-related loads. This may result in the acceleration of damage development on the components. Critical components of turbine blades and discs are exposed to cyclic thermal and mechanical multi-axial fatigue. In the current work, planar-biaxial Low-Cycle-Fatigue (LCF) tests are conducted using cruciform specimens at different test temperatures. The influence on the deformation and lifetime behaviour of the nickel-base disk alloy Inconel 718 is investigated at selected cyclic proportional loading cases, namely shear and equi-biaxial. The calculation of the stress and strain distribution of the cruciform specimens from the experimental data is difficult to obtain due to complex geometry and temperature gradients. Therefore, there is a need for Finite Element (FE) Simulations. A viscoplastic material model is considered to simulate the material behaviour subjected to uniaxial and the selected planar-biaxial loading conditions. At first, uniaxial simulation results are compared with the uniaxial experiment results for both batches of IN718. Then, the same material parameters are used for simulating the biaxial loading cases. The prediction of FE simulation results is in good agreement with the experimental LCF test for both shear and equi-biaxial loadings. The equivalent stress amplitude results of the biaxial simulation are compared with the uniaxial results. Furthermore, the lifetime is calculated based on the stabilized cycle from the simulation and by using Crossland and Sines multi-axial stress-based approaches. The Crossland model predicts fatigue life significantly better than the Sines model. Finally, the simulated lifetime results are compared with the experimental lifetime.

Probabilistic Analysis of LCF Crack Initiation Life of a Turbine Blade under Thermomechanical Loading

A Hybrid Modeling Method of Fatigue Crack Growth for Gas Turbine Blades under Combined High and Low Cycle Fatigue Loadings

Fatigue Crack Propagation Analysis in an Aero-Engine Turbine Disc Using Computational Methods and Spin Test

Risk Estimation for LCF Crack Initiation

Calculation of Finite Element of Thermal Stress and Analysis of Low-cyclic Fatigue Life for Non-central Hole Rotor of 135 MW Turbine

Probabilistic LCF Risk Evaluation of a Turbine Vane by Combined Size Effect and Notch Support Modeling

Reliability-based Low-Cycle Fatigue Damage Analysis for Turbine Blade with Thermo-Structural Interaction

Experimental and Numerical Investigation of High-Temperature Multi-Axial Fatigue

Substructure-based distributed collaborative probabilistic analysis method for low-cycle fatigue damage assessment of turbine blade-disk

Dynamic Probabilistic-Based LCF Damage Assessment of Turbine Blades Regarding Time-Varying Multi-Physical Field Loads

A multiaxial probabilistic fatigue life prediction method for nickel‐based single crystal turbine blade considering mean stress correction

A Combined High and Low Cycle Fatigue Model for Life Prediction of Turbine Blades

A Probabilistic Model for LCF

Probabilistic-based Combined High and Low Cycle Fatigue Assessment for Turbine Blades Using a Substructure-Based Kriging Surrogate Model

Fatigue life prediction of turbine blades with geometric imperfections made of stainless steel

Multiaxial creep–fatigue failure mechanism and life prediction of a turbine blade based on a unified numerical solution approach

Probabilistic LCF life prediction framework for turbine discs considering random load history

LCF life prediction of turbine disc alloy using crystal plasticity and 3D representative volume element containing twin boundaries

Analysis of Fatigue Cracking for Turbine Blade

Modeling crack growth of an aircraft engine high pressure compressor blade under combined HCF and LCF loading

A modified nonlinear cumulative damage model for combined high and low cycle fatigue life prediction