Abstract:In this thesis, a dual-branch dual-load parallel rectifier circuit structure is adopted. By adding a T-type unequal division structure for automatic power distribution, a band-stop structure is added at the end of the diode to expand the dynamic range of impedance matching, achieving wide dynamic input power matching and improving conversion efficiency. The open-circuited microstrip line TL11 and the π-type microstrip structure at the front end of the diode dynamically change the input voltage through passive voltage adjustment, which can reduce diode loss and eliminate the overlap of voltage and current harmonics, thereby reducing the diode's turn-on loss. By changing the voltage at both ends of the diode, the rectification efficiency can be improved, and the optimal working power point of the diode can be adjusted. Then, according to the needs, the two rectifier branches work efficiently under different input powers, thus achieving high conversion efficiency of the circuit over a wide input power dynamic range. Simulation results show that the rectification efficiency of the rectifier circuit reaches a maximum of 76.9% at a frequency of 5.8 GHz and an impedance of 650 Ω with an input power of 15 dBm, and the rectification efficiency is greater than 50% in the input power range of -0.1 dBm to 36.4 dBm, achieving high-efficiency rectification over an ultra-wide input power dynamic range.

Design of a Wide Dynamic Range Rectifier Array Based on Adaptive Input-Power Distribution

A Wide Dynamic Range Rectifier Array Based on Automatic Input Power Distribution Technique

Design of a wide dynamic range rectifier array with an adaptive power distribution technique

Rectifier Array With Adaptive Power Distribution for Wide Dynamic Range RF-DC Conversion

High-Efficiency 2-D Multibeam Rectenna Based on Gain Enhanced Patch Array

Compact Rectifier Array With Wide Input Power and Frequency Ranges Based on Adaptive Power Distribution

Dual-Module Ultrawide Dynamic-Range High-Power Rectifier for WPT Systems

Ultra-wide Power Range High-Efficiency RF Rectifier

A 900 MHz, Wide-Input Range, High-Efficiency, Differential CMOS Rectifier for Ambient Wireless Powering

Compact and ultra-wideband high-efficiency rectifier using asymmetric coupled-line impedance transformer

Dynamic range enhancement of RF rectifiers through adaptive power distribution employing an extended resonance network

A Self-Bias Rectifier with 27.6% PCE at -30Dbm for RF Energy Harvesting

Efficient Single- and Dual-Band Rectifiers With Wide Range of Load Variations

A Compact High-Efficiency RF Rectifier With Widen Bandwidth

A Wide Dynamic Range CMOS Differential Rectifier for Radio Frequency Energy Harvesting Systems

Adaptive Multiband Rectifier System for Stabilized Wireless Energy Harvesting at Flexible Distances and Dynamic Conditions

A VHF Wide-Input Range CMOS Passive Rectifier With Active Bias Tuning

RF Energy Harvesting with Wide Input Power Range

2-20-V Wide Input Range Active Rectifier with Single-Multiplexing Adaptive Delay Compensation and Low-Voltage Enhancement for Wireless Power Transmission

A CMOS RF-to-DC Rectifier with 86% PCE at Input Power of -14 dBm @ 2.4GHz for RF Energy Harvester

High Efficiency Rectifier Design at 5.8 GHz with High Input Power for Microwave Power Transmission Application