Abstract:In recent years, with the continuous derivative of the Internet of Things (IoT) business, the use of various types of information sensing equipment needs to continue to increase. However, power supply conditions are getting tougher. On the other hand, as the function of the devices itself increases, the power consumption also increases, and the lack of energy demand is more obvious. To solve these problems, a dual-frequency RF energy harvesting system is designed in this paper. First of all, in order to expand the effective receiving range of RF energy, this paper designed a 920 MHz hexagonal windmill circular-polarized antenna, and added an energy receiving circuit in the 2.45 GHz band on this basis, which fully alleviated the problem of insufficient energy collection for small devices in the Internet of Things while ensuring a small volume wavelength ratio. In addition, in order to improve the energy conversion efficiency, this paper also designed a dual-frequency rectifier circuit based on conjugate separation matching, using the harmonic signal of 920 MHz signal to broaden the bandwidth of 2.45 GHz. The experimental results show that the peak conversion rates of 920 MHz and 2.45 GHz channels are 72.8%@0dBm and 38.7%@-2dBm, respectively. Overall testing in a Wireless Fidelity (Wi-Fi) room with a commercial Radio Frequency Identification (RFID) reader. The experimental results show that the system can steadily output 3.29 V–3.3 V voltage within 6 m charging distance, which is 20% higher than the output voltage of the single-channel receiving system, and the receiving angle is 36.84% larger.

RF Energy Harvesting with Wide Input Power Range

A high-efficiency full-wave CMOS rectifying charge pump for RF energy harvesting applications

A 900 MHz, Wide-Input Range, High-Efficiency, Differential CMOS Rectifier for Ambient Wireless Powering

Wide Power Range RF Energy Harvester for Powering Ultralow-Power Devices

A Wide Dynamic Range CMOS Differential Rectifier for Radio Frequency Energy Harvesting Systems

A 17.5dB wide-dynamic range high-efficiency RF-to-DC power converter for wireless energy harvesting

A CMOS RF-to-DC Rectifier with 86% PCE at Input Power of -14 dBm @ 2.4GHz for RF Energy Harvester

A Self-Bias Rectifier with 27.6% PCE at -30Dbm for RF Energy Harvesting

A Wide Input Range Energy Harvesting System for AM Broadcast with Capacitor Load

Co-design of an Auxiliary Self-Bias Module and a CMOS Rectifier for RF Energy Harvesting

A High-Efficiency, Ultrawide-Dynamic-Range Radio Frequency Energy Harvester Using Adaptive Reconfigurable Technique

High-efficiency quad-band RF energy harvesting system with improved cross-coupled differential-drive rectifier

Design of High-efficiency Micro-watt RF Energy Harvesting System

A Broadband High-Efficiency RF Rectifier for Ambient RF Energy Harvesting

A 2.4 GHz High-Efficiency Rectifier Circuit for Ambient Low Electromagnetic Power Harvesting

A 1.8V Output RF Energy Harvester at Input Available Power of −20 dBm

A hybrid threshold self-compensation rectifier for RF energy harvesting

Adaptive Multiband Rectifier System for Stabilized Wireless Energy Harvesting at Flexible Distances and Dynamic Conditions

A Fully-Integrated CMOS Dual-Band RF Energy Harvesting Front-End Employing Adaptive Frequency Selection

Dual-band RF energy harvesting for low-power IoT devices

High-Efficiency Triple-Band RF-to-DC Rectifier Primary Design for RF Energy-Harvesting Systems