Electrical Characterization of AlGaN/ GaN-HEMTs on Semi-Insulating GaN Substrates Doped With Fe, C, or Mn and Grown by Hydride Vapor Phase Epitaxy

Daiki Tanaka,Kenji Iso,Ryutaro Makisako,Yuji Ando,Jun Suda
DOI: https://doi.org/10.1109/ted.2024.3375837
IF: 3.1
2024-01-01
IEEE Transactions on Electron Devices
Abstract:This article reports a comparative study on the effect of dopants in semi-insulating GaN substrates grown by hydride vapor phase epitaxy (HVPE) on the electrical characteristics of AlGaN/GaN high-electron-mobility transistors (HEMTs). GaN-HEMTs were fabricated on GaN substrates doped with iron (Fe), carbon (C), or manganese (Mn), and their electrical characteristics from 300 to 600 K were compared. Similar ON-state characteristics were observed at room temperature, regardless of the substrate dopant. However, in the OFF-state breakdown characteristics, the devices on the C-and Mn-doped substrates showed slightly lower gate leakage currents than those on the Fe-doped substrate. Pulsed I–V characteristics showed that all devices had a small current collapse of approximately 10% or less, although the devices on the C-and Mn-doped substrates had slightly larger current collapse than that on the Fe-doped substrate. Furthermore, the temperature dependence of the OFF-state breakdown characteristics showed that the devices on the C-and Mn-doped substrates had a breakdown voltage ( $\textit{V}_{\text{BD}}$ ) that exceeded 100 V, even at 600 K, while that for the device on the Fe-doped substrate was less than 20 V. Arrhenius plots of leakage current suggested that for the devices on the Fe-doped substrate, current conduction through the substrate occurred above 350 K, which resulted in a low $\textit{V}_{\text{BD}}$ . The devices on the C-and Mn-doped substrates had low leakage through the substrate due to the high resistivity of the substrate. These results indicate the feasibility of C-or Mn-doped GaN as HEMT substrates for use in high-voltage and high-temperature applications.
engineering, electrical & electronic,physics, applied
What problem does this paper attempt to address?