Abstract:The conductor on round core (CORC) cable is one of the major high temperature superconductor cable concepts combining scalability, flexibility, mechanical strength, ease of fabrication and high current density; making it a possible candidate as conductor for large, high field magnets. To simulate the boundary conditions of such magnets as well as the temperature dependence of CORC cables a 1.16 m long sample consisting of 15, 4 mm wide SuperPower REBCO tapes was characterized using the 'FBI' (force-field-current) superconductor test facility. In a five step investigation, the CORC cable's performance was determined at different transverse mechanical loads, magnetic background fields and temperatures as well as its response to swift current changes. In the first step, the sample's 77 K, self-field current was measured in a liquid nitrogen bath. In the second step, the temperature dependence was measured at self-field condition and compared with extrapolated single tape data. In the third step, the magnetic background field was repeatedly cycled while measuring the current carrying capabilities to determine the impact of transverse Lorentz forces on the CORC cable sample's performance. In the fourth step, the sample's current carrying capabilities were measured at different fields (2-12 T) and temperatures (4.2-51.5 K). Through finite element method simulations, the surface temperatures are converted into average sample temperatures and the gained field- and temperature dependence is compared with extrapolated single tape data. In the fifth step, the response of the CORC cable sample to rapid current changes (8.3 kA/s) was observed with a fast data acquisition system. During these tests, the sample performance remains constant. The sample's measured current carrying capabilities correlate to those of single tapes assuming field- and temperature dependence as published by the manufacturer.

Test Station for High Temperature Superconducting Power Cables

Superconducting Transformer for Superconducting Cable Testing up to 45 kA

Test Facility for Critical Current Measurement of Superconducting Conductors

International Round-Robin Test of Critical Current of Superconducting Cable Sample

Design and Performance Tests of a Fault Current-Limiting-Type Tri-Axial HTS Cable Prototype

Calibration of a superconducting transformer by measuring critical current of a NbTi Rutherford cable

Dc Superconducting Cable Using Mgb2 Wires

Status of the Top Plate and Anticryostat for High Field Cable Test Facility at Fermilab

Development of Supervisory Control and Data Acquisition System for India’s First High Temperature Superconducting Cable Testing

High Voltage Test of Iter Feeder Components under Paschen Condition

Status of the High Field Cable Test Facility at Fermilab

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Dynamic Experiment For The Magnetothermal Stability Of A 110 Kv/3 Ka Cold Dielectric High-Temperature Superconducting Cable With An Impact Of Fault Current In Power System

Experimental Investigation Of A High Temperature Superconducting Pancake Consisted Of The Rebco Composite Cable For Superconducting Magnetic Energy Storage System

Design of A Cryogenic System for A 20m Direct Current Superconducting Mgb2 and Ybco Power Cable

Temperature Calculation And Measurement On Power Cable Conductor Based On Equivalent Thermal Circuit And Botda

Experimental Studies of Critical Currents and Joint Resistance of HTS Twisted Stack Slotted-Core Cables

Electrical Insulation Design and Experimental Results of a High-Temperature Superconducting Cable

Temperature- and field-dependent characterization of a conductor on round core cable

RETRACTED: Development of a Cryogenic Test Bed for High Amperage Critical Current Measurement on High Temperature Superconductor Wire

Experimental 35 Kv/121 Mva Superconducting Cable System Installed at Puji Substation in China Southern Power Grid