Abstract:Thermodynamic functions and electrical resistivity of Pb-Bi eutectic alloy have been measured over wide ranges of specific volume and pressure in the liquid and gaseous state. The experimental data show a crossover from metallic to insulating behavior in the electrical resistivity of the alloy when its specific volume increases. It is found that in the crossover region the constant volume temperature coefficient of resistivity changes sign from positive to negative and passes through zero at a value of the specific volume which is 2.4 times larger than that in normal state. The second salient feature of the alloy revealed by these experiments is that the isochores plotted in the specific internal energy-pressure plane are straight lines. Based on these experimental data and using an earlier developed approach, an equation of state (EOS) of the alloy has been constructed whose accuracy is determined mainly by the errors of the measurements. It is shown that this EOS can be used to obtain direct estimates of the specific volume and pressure at the critical point of the liquid-gas transition as well as the critical volume for the metal-non-metal (M-NM) transition observed in this eutectic. The results indicate that the critical specific volumes for these two transitions are equal, and the M-NM transition can be described by the classical percolation theory.

Enthalpy and heat capacity of lead in a condensed state

Enthalpy and heat capacity of liquid Na15Pb4 and Na50Pb50 alloys

Enthalpy and Heat Capacity of Cs–Pb Alloys in Solid and Liquid States

Thermal conductivity of lead and bismuth-lead eutectic melts up to 1300 K

Transient Performance of a Thermal Energy Storage-Based Heat Sink Using a Liquid Metal As the Phase Change Material

Measurements of Isobaric Heat Capacity of R143a and R227ea at Liquid Phase by Quasi-Steady Scanning

Density and thermal expansion of indium–lead melts

Accurate heat capacity determination of solids and liquids using a heat conduction calorimeter

Analytical expressions for thermophysical properties of solid and liquid beryllium relevant for fusion applications

Gas Absorption and Discharge Behaviors of Lead-Lithium

Metal-non-metal transition in lead-bismuth eutectic

CALCULATION OF THERMODYNAMIC PROPERTIES OF HELIUM-3 BETWEEN 1K AND 100 K

Density and Molar Volume of Liquid Amalgams of Thallium, Lead, and Bismuth

Heat Capacity of Pure Magnesium and Ultralight Congruent Magnesium–Lithium Alloy in the Temperature Range of 300 K to 825 K

Heat capacities and entropies of liquid, high-melting-point polymers containing phenylene groups (PEEK, PC, and PET)

MEASUREMENTS OF FINE STRUCTURES IN THE LEAD-BISMUTH EUTECTIC ALLOY MELTS BY DIFFERENTIAL SCANNING CALORIMETRY

Validation of Lead-Bismuth Thermal Hydraulic Facilities Based on Modified Relap5

High-pressure phase transition and equation of state of lead to 238 GPa

Enthalpy of Phase Change Materials as a Function of Temperature: Required Accuracy and Suitable Measurement Methods

Low-Temperature Heat Capacity of Lanthanum Hafnate

Modified T-History Method for Measuring Thermophysical Properties of Phase Change Materials at High Temperature