Abstract:Partial and integral molar enthalpies of mixing of binary liquid Li-Zn alloys and ternary liquid Li-Sn-Zn alloys were determined by drop calorimetry at 823 K. The binary system was investigated up to x Zn = 0.85 and the integral mixing enthalpy was described with a Redlich-Kister-polynomial. Li-Zn shows an exothermic behavior and a minimum molar mixing enthalpy of about ΔH mix = -11.7 kJ⋅mol −1 at x Zn = 0.6. The mixing enthalpy along nine ternary sections of Li-Sn-Zn (A: x Li /x Sn ≈ 9:11, B: x Li /x Sn ≈ 1:4, C: x Sn /x Zn ≈ 9:1, D: x Sn /x Zn ≈ 7:3, E: x Sn /x Zn ≈ 1:1, F: x Li /x Zn ≈ 1:3, G: x Li /x Zn ≈ 1:1, H: x Li /x Zn ≈ 3:2, I: x Li /x Zn ≈ 7:3) was investigated. Solid pieces of Li, Sn, and Zn respectively were dropped to the liquid binary starting alloys in the calorimeter at 823 K. The integral values at the crossing points of the various sections show excellent agreement. The course of the partial and integral enthalpy values along the sections A, D, E, F, G, H, and I indicate multiple-phase regions. The occurrence of such partially liquid and de-mixed liquid regions is discussed and compared with a calculated version of the isothermal section at 823 K which exhibits a large ternary liquid miscibility gap. The experimental ternary data allocated to the fully liquid monophasic regions was numerically fitted based on a Redlich-Kister-Muggianu polynomial for substitutional solutions including ternary interactions. In addition, a comparison with enthalpy values from the extrapolation methods based on binary data according to the Muggianu and Toop model, respectively, is shown. Both models fail to accurately reproduce the experimental values. Iso-enthalpy plots of calculated integral mixing enthalpy for stable and metastable fully homogeneous liquid alloys for the entire ternary system are shown.

Density and Molar Volume of Liquid Amalgams of Thallium, Lead, and Bismuth

Density and thermal expansion of indium–lead melts

Melting-Pressure And Density Equations Of He-3 At Temperatures From 0.001 To 30 K

Reference Data for the Density and Viscosity of Liquid Antimony, Bismuth, Lead, Nickel and Silver

Reference Data for the Density and Viscosity of Liquid Cadmium, Cobalt, Gallium, Indium, Mercury, Silicon, Thallium, and Zinc

Enthalpy and heat capacity of lead in a condensed state

Enthalpy and heat capacity of liquid Na15Pb4 and Na50Pb50 alloys

Thermal conductivity of lead and bismuth-lead eutectic melts up to 1300 K

Thermodynamics of Liquid Alloys and Vapor–Liquid Equilibrium in the Antimony–Tellurium System

Density and Thermal Expansion of Molten Manganese, Iron, Nickel, Copper, Aluminum and Tin by Means of the Gamma-Ray Attenuation Technique

P–ρ–T Measurements for 1-Alkyl-3-methylimidazolium-Based Ionic Liquids with Tetrafluoroborate and a Trifluoromethanesulfonate Anion

Thermodynamic properties of liquid mercury to 520 K and 7 GPa from acoustic velocity measurements

Densities and excess molar volumes of binary and ternary melts of MgCl2, CaCl2 and AlkCl

Lead-Bismuth Eutectic: Atomic and Micro-Scale Melt Evolution

Reference Correlation for the Density and Viscosity of Eutectic Liquid Alloys Al+Si, Pb+Bi, and Pb+Sn

Liquid phase vapor pressure measurement and thermodynamics assessment of the Hg–In binary system

Calorimetric study of the enthalpy of mixing in the liquid systems Li-Zn and Li-Sn-Zn

Equation of State of Liquid Bismuth and Its Melting Curve from Ultrasonic Investigation at High Pressure

Physical properties of Thallium-Tellurium based thermoelectric compounds using first-principles simulations

Thermodynamic Investigations of Liquid Cerium–bismuth Alloys

Volume Properties of Ammonium Halide Solutions in an N-Methyl Pyrrolidone–Water Mixed Solvent at 298.15 K