Abstract:The biomedical sector requires the use of composite materials whose properties can replace those of defective organs, especially bones, of which the Hydroxyapatite structure is the main component of bones and teeth. Herein, we report successful elaboration of new Mg-rich sulfato-calcium hydroxyapatite (SCHA) coating by cathodic electrodeposition on an anodized Ti6Al4V alloy substrate under bias voltages of 10, 20 and 30 V. The resulting deposits were well identified by numerous characterization techniques, such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and scanning electron microscopy (SEM). Anodizing the Ti-based substrate under a bias voltage of 20 V produces TiO 2 layers with ordered nanotube arrays of approximately (80-100 nm), which are completely damaged at 30 V, leading to an irregular porous structure. The deposits made at 10 and 20 V present cracks, unlike that made at 30 V which is more uniform and less rough. XRD analysis reveals both an amorphous structure for the latter and the existence of a crystalline to amorphous conversion as a function of the anodization voltage for the apatite deposition. Electrochemical tests performed in Hank's simulated body fluid (HSBF) confirm the formation of the apatite deposit which implies a chemical surface modification and reveal interesting anticorrosion properties for the apatite-coated samples, with the highest polarization resistance recorded for that treated at 20 V, with a corrosion current density ( i corr ) of 4.25 μA/cm 2 and a polarization resistance ( R p) of 4.60 kΩ cm 2 . The results obtained confirm both the nature and the structure of the produced deposits (TiO 2 layers and Mg-SCHA/TiO 2 ). Electrochemical tests performed in Hank's simulated body fluid (HSBF) reveal interesting anticorrosion properties for coated and anodized samples, compared to those uncoated, with the highest corrosion resistance recorded for the anodized sample at 10 V. This suggests that the biocompatible Mg-rich SCHAs deposit, elaborated by simple chemical route from biological waste could be suitable for biomedical purposes.

Effect of pulsed electrodeposition time on the characteristics of calcium phosphates coating on TiO2 nanostructures

Effect of Supersaturation on the Morphology of Hydroxyapatite Crystals Deposited by Electrochemical Deposition on Titanium

Effect of EDTA on Electrodeposition of Hydroxyapatite Coatings

Biomimetic Calcium Phosphate Coatings for Bioactivation of Titanium Implant Surfaces: Methodological Approach and In Vitro Evaluation of Biocompatibility

Longer-Term Mechanical And Biological Evaluation Of Titanium Alloy Coated With Apatite Layer

Properties of Coatings Based on Calcium Phosphate and Their Effect on Cytocompatibility and Bioactivity of Titanium Nickelide

Electrolytic Deposition of Calcium Phosphate Coatings on Titanium Substrate

Preparation and biological evaluation of Nano-HA coating on tatinium surfaces

Calcium Phosphate Coatings Deposited on 3D-Printed Ti–6Al–4V Alloy by Plasma Electrolytic Oxidation

Preparation of Calcium Phosphate Coating on Titanium Alloy Substrate and Its Mechanism Study

Surface Modification and Tribological Performance of Calcium Phosphate Coatings with TiO2 Nanoparticles on VT1-0 Titanium by Micro-Arc Oxidation

On the Electrodeposition of Ca-P Coatings on Nitinol Alloy: A Comparison Between Different Surface Modification Methods

The biocompatibility of nanostructured calcium phosphate coated on micro-arc oxidized titanium.

In vitro study of electrodeposited fluoridated hydroxyapatite coating on G-II titanium with a nanostructured TiO2 interlayer

Study of Mg-Rich Sulfato-Calcium Hydroxyapatite Coating on Anodized Ti6Al4V-Alloy for Biomedical Applications

Hydrothermal growth of biomimetic calcium phosphate network structure on titanium surface for biomedical application

Perfusion electrodeposition of calcium phosphate on additive manufactured titanium scaffolds for bone engineering

Calcium Phosphate Film Coating on Titanium Substrate by Electrochemical Deposition

Zn- or Cu-containing CaP-Based Coatings Formed by Micro-Arc Oxidation on Titanium and Ti-40Nb Alloy: Part II—Wettability and Biological Performance

Hydroxyapatite Coating on Ti-6Al-7Nb Alloy by Plasma Electrolytic Oxidation in Salt-Based Electrolyte

Preparation of Dicalcium Phosphate Anhydrous (Monetite) Biological Coating on Titanium by Spray-Drying Method