Abstract:Reference electrodes which demonstrate long-term potential stability are essential for many continuous monitoring applications and are commonly based on Ag|AgCl electrodes; however, these electrodes are susceptible to poisoning from aqueous sulphide species which are commonly present in wastewater and natural groundwater. This work presents a sulphide resistant solid-state reference electrode (SSRE) based on a composite material using suspended KCl electrolyte and sacrificial AgCl in a cross-linked polyvinyl acetate polymer matrix. Sulphidation of the sacrificial AgCl produces a stable Ag 2 S precipitate and prevents further ingress of the poisoning sulphide species through the composite material. A novel SSRE using this material is compared to a control SSRE without suspended AgCl and a typical liquid filled reference electrode. These three reference electrodes are studied using electrochemical impedance spectroscopy (EIS), and their application is also studied in potentiometric pH sensing and cyclic voltammetry (CV). The long-term sulphide resistance of the two SSREs is also studied with potentiometry, and cross-sections of these electrodes were examined using micro X-ray fluorescence (μXRF). Both SSREs demonstrated higher impedance than the liquid reference electrode but were similar to other SSREs reported in the literature. This impedance did not result a meaningful difference in potentiometric pH sensing or CV experiments done using typical scan rates. The KCl/AgCl SSRE exhibited remarkable sulphide resistance, with all samples demonstrating a stable potential without maintenance after ca . 120 days of continuous immersion in 1 g L −1 Na 2 S solution, whereas KCl SSRE samples all demonstrated significant drift before this time. μXRF sulphur maps revealed that suspended AgCl prevented sulphide ingress, thus protecting the embedded Ag|AgCl electrode. This work presents a reference electrode that could enable long-term monitoring in challenging sulphide solutions, and also highlights a novel approach for preventing reference electrode poisoning which could be more widely explored.

Long-Term Performance of Reference Electrodes in Alkaline Radioactive Waste Storage Environments

Long-Term Performance of Ag/AgCl Reference Electrodes for Corrosion Potential Monitoring in Radioactive Tank Waste at the Hanford Site

A Comparative Study on Stabilization of Available As in Highly Contaminated Hazardous Solid Waste.

Long-Term Prediction of Localized Corrosion of Alloy 825 in High-Level Nuclear Waste Repository Environments

A sulphide resistant Ag|AgCl reference electrode for long-term monitoring

Long-Time Evaluation of Solid-State Composite Reference Electrodes

The corrosion behavior of nonferrous metals in deep geological repository environments

Field Test on Electro-Osmosis in a Heavy Metal Contaminated Soil: Electrokinetic Remediation and Reinforcement of the Soil

Electrochemical corrosion of multiphase stainless steel-based alloy nuclear waste forms

Influence of the Al Content on the Electrochemical Behavior of Zn-Al Cold-Sprayed Coatings in the Context of the Deep Geological Disposal of Radioactive Waste

Long-Life Mullite and Boron Nitride Membranes Ag/Agcl and Pb/Pbcl2 Reference Electrodes for Licl-Kcl Eutectic Melt

Long term corrosion estimation of carbon steel, titanium and its alloy in backfill material of compacted bentonite for nuclear waste repository

Effect of Sulfide and Chloride Ions on Pitting Corrosion of Type 316 Austenitic Stainless Steel in Groundwater Conditions Using Response Surface Methodology

Research on Electrochemical Behaviour of Reference Electrodes for Corrosion Test under High Hydrostatic Pressure for Simulating Deep-Sea

Pitting and General Corrosion Susceptibilities of Materials for High Level Radioactive Waste (HLW) Disposal

EIS study on aerobic corrosion of copper in ground water: influence of micro-organisms

Corrosion Behaviour of Carbon Steel, Titanium and Titanium Alloy in Simulated Underground Water in Beishan Area Preselected for Nuclear Waste Repository in China

Development and Properties of Reference Electrode for Electrochemical Corrosion in High Temperature and High Pressure Environment

Corrosion Behaivour of X65 Low Carbon Steel During Anaerobic Period of High Level Nuclear Waste Disposal

Corrosion Behavior and Sacrificial Properties of Zn and Zn-Al Coatings in Conditions Simulating Deep Geological Disposal of Radioactive Waste at 80 °C

Electrochemical Analysis of Metal Stability in Candidate Reference Electrode Fluoride Salts (FLiNaK + 1 wt% AgF, MnF 2 , or NiF 2 )