Abstract:Solid state batteries have gained attention due to the promise of safe operation of battery at high voltage and for longer duration. Solid electrolytes may also help to stabilize conversion electrodes for higher energy density. Arsenic alloys are rarely studied, but several may be interesting as the negative electrode, for example, FeAs, As/C, and InAs.1 The fact that the cost per pound of Arsenic is less than the counterpart negative electrode candidates like Si, Ge, In, Pb, Ti, and V is advantageous.2 In this context, we chose Li3As as a negative electrode material in a solid-state battery configuration. The intrinsic high electronic conductivity of Li3As and conversion reaction mechanism providing a high energy density are the reasons behind selecting Li3As for studying the cycling and interface stability with a Li-P-S based solid electrolyte. The solid-state battery was cycled at different temperatures and the resultant pellet was dissected for analyzing the interface layer formed. The battery that has the iodide doped solid electrolyte performed well in terms of electrochemical cycling properties compared to the undoped electrolyte. An iodide rich layer between the solid electrolyte and Li3As electrode formed within few cycles. This thin iodide rich layer is responsible for the stable performance of the solid-state battery for over 100 cycles. Acknowledgement: This work was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Vehicle Technologies of the U. S. Department of Energy under the Advanced Battery Materials Research Program. Synthesis of the electrolyte was conducted as part of user proposal at ORNL’s Center for Nanophase Materials Sciences (CNMS), which is an Office of Science User Facility. References: (a) J. Chen, H. Zhao, N. Chen, X. Wang, J. Wang, R. Zhang, and C. Jin, J. Power Sources, 200, 98 (2012); (b) X. Lia, D. Xiao, H. Zheng, X. Wei, X. Wang, L. Gu, Y.-S. Hu, T. Yang, and Q. Chen, Nano Energy, 20, 194(2016); (c) C.-M. Park, J. Solid State Electrochem., 20, 517 (2016). N. Nitta and G. Yushin, Part. Part. Syst. Charact., 31, 317 (2014). *Corresponding author email: dudneynj@ornl.gov

Long-Life Mullite and Boron Nitride Membranes Ag/Agcl and Pb/Pbcl2 Reference Electrodes for Licl-Kcl Eutectic Melt

A Corundum Membrane Ni/Ni2+ Reference Electrode for High-Temperature Fluoride Molten Salt

Accelerated Separation of Uranium from Lanthanides (La, Ce, Sm) in LiCl-KCl Eutectic by Porous Aluminum Electrodes

Electrochemical Behaviors and Extraction of Ln(III) (Ln = La, Ce, Nd) Ions in LiCl–KCl–CsCl Eutectic Salts at Low Temperatures

Investigation of Solid Electrolyte Interface Formation in Li3as Electrode Material in a Solid-State Battery Configuration

Separation of lanthanides erbium and ytterbium on indium electrodes by modulated potential selective extraction in molten salts and a thermodynamic and kinetic analysis of the process

Lanthanide Silicide Formation on Si Electrode in LiCl–KCl Melt for Immobilization of Chloride Waste in Pyroprocessing of Nuclear Fuels

Multiphysics Simulation Study of the Electrorefining Process of Spent Nuclear Fuel from LiCl-KCl Eutectic Molten Salt

Revealing milling durations and sintering temperatures on conductivity and battery performances of Li2.25Zr0.75Fe0.25Cl6 electrolyte

Long-Term Performance of Ag/AgCl Reference Electrodes for Corrosion Potential Monitoring in Radioactive Tank Waste at the Hanford Site

Engineering A Boron-Rich Interphase with Nonflammable Electrolyte Toward Stable Li||NCM811 Cells under Elevated Temperature

Electrochemical extraction kinetics of Nd on reactive electrodes

Electrochemical Drawdown of U 3+ and Ce 3+ in Molten LiCl-KCl Using a Liquid Cadmium Cathode

Engineering A Boron‐Rich Interphase with Nonflammable Electrolyte Towards Stable Li||NCM811 Cells Under Elevated Temperature

Electrochemical Analysis of Metal Stability in Candidate Reference Electrode Fluoride Salts (FLiNaK + 1 wt% AgF, MnF 2 , or NiF 2 )

Electrolyte Engineering to Construct Robust Interphase with High Ionic Conductivity for Wide Temperature Range Lithium Metal Batteries

Alkaline Stability of Anion-Exchange Membranes

Investigation of electrochemical behavior of cerium in LiCl-KCl eutectic molten salt by modeling

Construction of nitrogen-doped carbon cladding LiMn2O4 film electrode with enhanced stability for electrochemically selective extraction of lithium ions

Ion Flux Regulation through PTFE Nanospheres Impregnated in Glass Fiber Separators for Long‐Lived Lithium and Sodium Metal Batteries

Anion Exchange Membranes Based on Sulfonated Poly(ether ether ketone) Crosslinked Methylpyrrolidinium Functionalized Poly (vinyl benzyl chloride) with High Chemical Stability