Abstract:<p>Fluoride molten salts have a high melting point and latent heat of phase change, and can be used as a high-temperature phase-change heat-storage material. In this study, the Phase Diagram module of FactSage6.2 was used to calculate and draw the phase diagram of a quaternary fluoride salt system using two routes. The formulations meeting the melting-point requirement were further analyzed using the Equilib and Viscosity modules. We propose the "lowest liquid phase saturation point temperature–phase separation–viscosity" model to screen several sets of best experimental formulations. The experimental results prove the feasibility of the model, and the selected formulations offer the advantages of limited phase separation, good thermal stability, and high latent heat.</p>

What problem does this paper attempt to address?

This paper mainly discusses how to optimize the formulation of fluoride molten salts for high-temperature phase change thermal energy storage materials. In the study, the authors used FactSage6.2 software to calculate and plot the phase diagram of the quaternary fluoride salt system. They screened out experimental formulations with low melting points, limited phase separation, good thermal stability, and high latent heat using the "lowest liquid phase saturation temperature - phase separation - viscosity" model. The research first introduces the importance of thermal energy storage, especially the role of latent heat storage technology in regulating supply-demand mismatch, efficient resource utilization, and alleviating energy burden. Fluoride molten salts have become ideal thermal storage materials due to their high melting points, high latent heat, good thermal stability, and low viscosity. However, the melting point of single-component fluoride salts is too high, so it is usually necessary to mix different types of fluorides to lower the melting point. In the paper, the researchers used the Phase Diagram, Equilib, and Viscosity modules of FactSage6.2 software to theoretically calculate sodium, potassium, magnesium, and calcium fluorides. They analyzed the phase diagrams of fluoride salts at different proportions, the variation of liquid phase content with temperature, and the viscosity. They proposed a new model to select formulations based on the lowest liquid phase saturation temperature, degree of phase separation, and viscosity, to ensure good phase stability after multiple heating cycles. In the experimental part, the researchers prepared mixed fluoride salts and characterized their melting points and latent heat using the thermogravimetric analysis-differential scanning calorimetry (TG-DSC) method. The results showed that certain proportions of fluoride salt formulations had lower melting points and smaller phase separation possibilities, as well as higher latent heat and good thermal stability. Through the above work, the paper provides theoretical guidance and experimental basis for selecting suitable heat transfer fluids for solar thermal power generation systems.

Lowest liquid phase saturation point temperature–phase separation–viscosity model for the optimal formulation of mixed fluoride salt

MD Simulation and Transport Property Analysis of Silicon in High-Temperature Molten Fluoride Salts Electrolyte

A study on quaternary mixed fluoride salts as heat storage materials

THREE COMPOSITIONS OF HIGH-ENTROPY MELTS OF LITHIUM, SODIUM AND POTASSIUM FLUORIDES AND CHLORIDES AS PROMISING COOLANTS FOR MOLTEN SALT REACTORS

Thermal transport and storage performances of NaCl–KCl–NaF eutectic salt for high temperatures latent heat

Survey and evaluation of equations for thermophysical properties of binary/ternary eutectic salts from NaCl, KCl, MgCl2, CaCl2, ZnCl2 for heat transfer and thermal storage fluids in CSP

Powerful predictability of FPMD simulations for the phase transition behavior of NaCl-MgCl2 eutectic salt

Phase diagram prediction and experimental verification of a binary hydrated salt mixture as phase change thermal storage materials

On the viscosity of molten salts and molten salt mixtures and its temperature dependence

Effects of fluoride salt addition to the physico-chemical properties of the MgCl2–NaCl–KCl heat transfer fluid: A molecular dynamics study

Tuning the low-temperature phase behavior of aqueous ionic liquids

Experimental investigation and phase separation elimination of Na2SO4·10H2O and KAl(SO4)2·12H2O mixtures for thermal energy storage

Experimental Investigation and Thermodynamic Modeling of Solid–Liquid Equilibria in the Ternary System KCl–CsCl–H 2 O to High Concentrations from 273.15 to 348.15 K

Design and performance of a molten fluoride salt-compatible optical thermophysical property measurement system

Thermophysical properties of FLiBe using moment tensor potentials

Local Structure and Thermophysical Properties of the Molten Salt FNaBe Through Ab Initio Molecular Dynamics and Experimental Measurements

A novel model for calculating the melting process of composite phase change materials

Phase Diagram of the Quasibinary System LiF–NaF–KF–CeF3

Study on the Structure and Transport Properties of Molten Salts of NaF–KF–AlF3 Electrolytes by First-Principles Molecular Dynamics Simulation

High-Throughput falling ball viscometer for measuring High-Temperature molten salts

Preparation of FLiNaK molten salt