Abstract:The temperature dependences of the dynamic viscosity of molten lithium and beryllium fluorides, which are considered as candidate compositions for fuel and coolant of the molten salt reactor (MSR) burner of long-lived actinides from spent nuclear fuel of a VVER 1000/1200 (pressurized water reactor), were obtained by rotational viscometry using an FRS 1600 high-temperature rheometer (Anton Paar, Austria). Molten salt mixtures 0.66LiF–0.34BeF 2 and (0.73LiF–0.27BeF 2 ) + UF 4 containing 1 and 2 mol % UF 4 were studied with regard to the intermediate and fuel circuits of the MSR. The salt mixtures were prepared by direct melting of components and certified using X-ray phase and elemental analyses. The shear rate parameter was selected according to the viscosity curves obtained in the melts at a temperature of 700°C. It was found that the viscosity does not depend on the shear rate in the range of γ = 6–20 s –1 . When measuring the temperature dependence of viscosity, the γ value was 11 s –1 . The experimentally obtained values of the viscosity of the LiF–BeF 2 –UF 4 melts in the temperature range from liquidus to 800°C are described by the linear equation log η = a + b / t , but their temperature coefficients differ noticeably, which indicates a significant dependence of the viscosity of these melts on composition and temperature. The obtained viscosity values for the 0.66LiF–0.34BeF 2 melt agree with the available published data within 7–10% in the temperature range of 650–750°C. With an increase in the LiF content, the viscosity of the melt decreases: it is 20% lower in the 0.73LiF–0.27BeF 2 melt at t = 650°C. However, when 2 mol % UF 4 is added, the viscosity of the fuel salt 0.73LiF–0.27BeF 2 + UF 4 increases by 10% at the same temperature.

Local Structure and Thermophysical Properties of the Molten Salt FNaBe Through Ab Initio Molecular Dynamics and Experimental Measurements

HT-NMR Studies of the Be-F Coordination Structure in FNaBe and FLiBe Mixed Salts

Probing the Local Structure of FLiBe Melts and Solidified Salt by in-situ High-temperature NMR

The structure of molten FLiNaK

Study on the Structure and Transport Properties of Molten Salts of NaF–KF–AlF3 Electrolytes by First-Principles Molecular Dynamics Simulation

Thermal Properties of NaF–KF and NaF–KF–MgF2 Molten eutectic Mixtures: Experiment and Simulation

Theoretical Studies of Structure and Dynamics of Molten Salts: the LiF-ThF4 System.

Numerical prediction of the heat transfer properties of Flinabe molten salt as a coolant in a nuclear system

Thermophysical Properties of FUNaK (NaF-KF-UF4) Eutectics

First-principles investigation of the thermophysical properties of NaCl, PuCl3, and NaCl-PuCl3 Molten salts

Numerical analysis of the viscosity of ZrF 4 –BeF 2 molten salts for nuclear transmutation using fusion neutron sources

Computational Study of the Physical Properties of a High Temperature Molten Salt Mixture of FLiNaK and CeF3

X-ray and molecular dynamics study of the temperature-dependent structure of molten NaF-ZrF4

Deep Potential Molecular Dynamics on the Microstructure and Thermodynamic Properties of FLiNaK&ndash;ThF&lt;sub&gt;4&lt;/sub&gt;

Thermophysical properties of FLiBe using moment tensor potentials

The Viscosity of Molten Salts Based on the LiF–BeF2 System

Ab initio molecular dynamics assessment of thermodynamic and transport properties in (K,Li)Cl and (K, Na)Cl molten salt mixtures

A deep potential molecular dynamics study on the ionic structure and transport properties of NaCl-CaCl2 molten salt

Thermophysical properties of Molten FLiNaK: A moment tensor potential approach

Transferable Deep Learning Potential Reveals Intermediate-Range Ordering Effects in LiF-NaF-ZrF4 Molten Salt