Abstract:In recent years, the molten salt reactor (MSR) has attracted increasing attention and become one of the most important "Generation IV reactor" designs. In particular, the fact that molten fluoride salts are utilized as liquid fuel and coolant constitutes the main feature of the reactor. Furthermore, since the molten fluoride salt has a high Prandtl number and contains quite different behaviors to those of ordinary water and gas, an in-depth investigation of molten fluoride salt is thus highly demanded. Hence, it is the central objective of this study to examine the thermal-hydraulic characteristics of molten salt especially for the optimal design of reactor core and its safety operation. In this study, the dependence of pressure drop, Nusselt number and entrance length on the inlet Reynolds number for a molten fluoride salt (LiF(46.5)-NaF(11.5)-KF(42)) are computed using a comprehensive computational fluid dynamics (CFD) methodology. The methodology employs the continuity equation, momentum equation, energy equation, and standard k-ε turbulence model to conduct fluid dynamics simulation. For simplicity, the geometry employed in this study is a circular tube. The simulated results indicated that the pressure drop and Nusselt number and entrance length increase as the inlet Reynolds number increases. And the computed pressure drop corresponds well to theoretical value. It is also given a new correlation of computed entrance length in this paper. In addition, two well-known Nusselt number correlations such as, Hausen, Gnielinski, are employed to make comparisons with the computed results. It is also found that the computed Nusselt numbers overestimate the Hausen ones in the high Reynolds number region. However, the computed Nusselt numbers correspond well to the Gnielinski ones in all the Reynolds numbers region. Also notice that an experimental setup is currently in progress in order to validate the present CFD simulation.

The Viscosity of Molten Salts Based on the LiF–BeF2 System

Probing the Local Structure of FLiBe Melts and Solidified Salt by in-situ High-temperature NMR

Numerical analysis of the viscosity of ZrF 4 –BeF 2 molten salts for nuclear transmutation using fusion neutron sources

A study of plutonium fluoride solubility in LiF–BeF2 melt for the substantiation of a molten salt reactor for Np, Am, Cm transmutation

Numerical prediction of the heat transfer properties of Flinabe molten salt as a coolant in a nuclear system

Local Structure and Thermophysical Properties of the Molten Salt FNaBe Through Ab Initio Molecular Dynamics and Experimental Measurements

On the viscosity of molten salts and molten salt mixtures and its temperature dependence

High-Throughput falling ball viscometer for measuring High-Temperature molten salts

HT-NMR Studies of the Be-F Coordination Structure in FNaBe and FLiBe Mixed Salts

Prediction of the thermophysical properties of molten salt fast reactor fuel from first-principles

Thermal Properties of NaF–KF and NaF–KF–MgF2 Molten eutectic Mixtures: Experiment and Simulation

Theoretical Studies of Structure and Dynamics of Molten Salts: the LiF-ThF4 System.

ICONE19-43445 Investigating Thermal-Hydraulic Characteristic of Molten Fluoride Salt in A Circular Pipe Using A CFD Methodology

First-principles molecular dynamics study of the behavior of tritium in molten LiF-BeF2 eutectic

THREE COMPOSITIONS OF HIGH-ENTROPY MELTS OF LITHIUM, SODIUM AND POTASSIUM FLUORIDES AND CHLORIDES AS PROMISING COOLANTS FOR MOLTEN SALT REACTORS

Performance of the MACE-MP-0 potential for calculating viscosity in LiF molten salt

Density Measurements of Molten LiF-BeF2 and LiF-BeF2-LaF3 Salt Mixtures by Neutron Radiography

Thermophysical properties of FLiBe using moment tensor potentials

First-Principles Investigation of the Effects of UF 4 and ThF 4 Fuels on the Structural, Dynamic, and Thermodynamic Properties of LiF-NaF

Thermophysical Properties of FUNaK (NaF-KF-UF4) Eutectics

LiF-NiF2 system: high temperature stability study of Li2NiF4(s) and interaction of fuel salts of molten salt reactor with structural material components