Abstract:Nanoparticle dispersions at a minute concentration in salt mixtures have recently been reported to significantly increase their specific heat capacity. However, there is a discrepancy between experimental results reported for the same kind of molten salt-nanoparticle mixtures by different research groups. From our literature survey, we learned that there is no standardized synthesis protocol for preparing molten salt nanofluids. In general, two-step method has been the most widely used in the literature. Nanoparticles and salts are dispersed in an aqueous solution. The mixture is then ultrasonicated to disperse the nanoparticles homogeneously. The mixture is then dried at elevated temperatures to obtain uniformly mixed salt-nanoparticle mixture, which results in a molten salt nanofluid when the mixture is heated above the melting point of the salt mixture. In this method, the duration of the ultrasonication can play an important role in the dispersion of nanoparticles. However, there is no consensus on how much time is required to disperse nanoparticles homogeneously. Literature survey shows that the duration of ultrasonication used to prepare molten salt nanofluids varies from 0.5 h to 5 h. In this study, we assume that the discrepancy reported in the literature could be due to different ultrasonication times used in different studies. We chose the most widely studied molten salt nanofluids, synthesized in different ultrasonication times, compared their specific heat capacity enhancements, and proposed the optimum ultrasonication time to apply for future molten salt nanofluid preparation. Thermogravimetric analysis was performed to study the thermal stability of the pure salts and nanofluids from 100 °C to 600 °C. Nanofluids prepared using 3 h of ultrasonication time showed the highest enhancement of 1.70 kJ/kg°C, which was approximately 15.6 % higher than the pure base salts. The result of the study can be impactful in solar energy industry sector and can be used as a guideline to prepare molten salt nanofluids for their solar thermal energy storage media.

On the viscosity of molten salts and molten salt mixtures and its temperature dependence

Experimental study of viscosity characteristics of high-temperature heat transfer molten salts

Experimental study of viscosity of new kind of molten salt with low melting point

A Brief Guide to the Structure of High-Temperature Molten Salts and Key Aspects Making Them Different from Their Low-Temperature Relatives, the Ionic Liquids

High-Throughput falling ball viscometer for measuring High-Temperature molten salts

Thermal performance analysis of molten salt based on a novel experimental rig

Molten salts database for energy applications

Mathematical modeling of melting point and viscosity of a new molten salt for concentrating solar plant

Survey and evaluation of equations for thermophysical properties of binary/ternary eutectic salts from NaCl, KCl, MgCl2, CaCl2, ZnCl2 for heat transfer and thermal storage fluids in CSP

The Viscosity of Molten Salts Based on the LiF–BeF2 System

An update review of molecular dynamic study on thermal physical properties of molten salt

Research and Application of Molten Salts for Sensible Heat Storage

An improved laser flash method for thermal conductivity measurement of molten salts

Review on Thermophysical Properties and Corrosion Performance of Molten Salt in High Temperature Thermal Energy Storage

A synthesis parameter of molten salt nanofluids for solar thermal energy storage applications

Thermal conductivity and thermal diffusivity of molten salts: insights from molecular dynamics simulations and fundamental bounds

Theoretical estimation of temperature-dependent radiation properties of molten solar salt using molecular dynamics and first principles

Experimental and theoretical investigation of an innovative composite nanofluid for solar energy photothermal conversion and storage

Design of new molten salt thermal energy storage material for solar thermal power plant

Local Structure and Thermophysical Properties of the Molten Salt FNaBe Through Ab Initio Molecular Dynamics and Experimental Measurements

Atomistic Simulation Framework for Molten Salt Vapor-Liquid Equilibrium Prediction and its Application to NaCl