Abstract:The Molten Salt Reactor (MSR), which is one of the 'Generation IV' concepts, can be used for production of electricity, actinide burning, production of hydrogen, and production of fissile fuels. In this paper, a single-liquid-fueled MSR was selected for conceptual research. For this MSR, a ternary system of 15%LiF-58%NaF-27%BeF2 was proposed as the reactor fuel solvent, coolant and also moderator with ca. 1 mol% UF4 dissolving in it, which circulates through the whole primary loop accompanying fission reaction only in the core. The fuel salt flow makes the MSR different from the conventional reactors using solid fissile materials, and makes the neutronics and thermal-hydraulic coupled strongly, which plays the important role in the research of reactor safety analysis. Therefore, it's necessary to Study the coupling of neutronics and thermal-hydraulic The theoretical models of neutronics and thermal-hydraulics under steady condition were conducted and calculated by numerical method in this paper. The neutronics model consists of two group neutron diffusion equations for fast and thermal neutron fluxes, and balance equations for six-group delayed neutron precursors considering flow effect. The thermal-hydraulic model was founded on the base of the fundamental conservation laws: the mass, momentum and energy conservation equations. These two models were coupled through the temperature and heat source. The spatial discretization of the above models is based on the finite Volume method (FVM), and the thermal-hydraulic equations are computed by SIMPLER algorithm with domain extension method on the staggered grid system. The distribution of neutron fluxes, the distribution of the temperature and velocity and the distribution of the delayed neutron precursors in the core were obtained. The numerical calculated results show that, the fuel salt flow has little effect to the distribution of fast and thermal neutron fluxes and effective multiplication factor; however, it affects the distribution of the delayed neutron precursors significantly, especially long-lived one. In addition, it could be found that the delayed neutron precursors influence the neutronics slightly under the steady condition; and the flow could remove the heat generated by the neutron reactions easily to ensure the reactor safe. The obtained results serve some valuable information for the research and design of this new generation reactor.

A study of plutonium fluoride solubility in LiF–BeF2 melt for the substantiation of a molten salt reactor for Np, Am, Cm transmutation

Estimated Transmutation Efficiency in a Molten-Salt Burner Reactor

The Viscosity of Molten Salts Based on the LiF–BeF2 System

Preliminary Study on LiF4-ThF4-PuF4 Utilization as Fuel Salt of miniFUJI Molten Salt Reactor

Probing the Local Structure of FLiBe Melts and Solidified Salt by in-situ High-temperature NMR

Investigation of the Quasi-Binary Phase Diagram FLiNaK-NdF3

A comparison of actinide halides for use in molten salt reactor fuels

Influence of 7Li enrichment in FLi/FLiBe on Th-U conversion performance for molten salt fast reactor

Numerical prediction of the heat transfer properties of Flinabe molten salt as a coolant in a nuclear system

Theoretical Studies of Structure and Dynamics of Molten Salts: the LiF-ThF4 System.

First-principles molecular dynamics study of the behavior of tritium in molten LiF-BeF2 eutectic

Control and surveillance of redox potential for 233Pa dissolution in 2LiF-BeF2 molten salt

LiF-NiF2 system: high temperature stability study of Li2NiF4(s) and interaction of fuel salts of molten salt reactor with structural material components

First-principles investigation of the thermophysical properties of NaCl, PuCl3, and NaCl-PuCl3 Molten salts

Thermophysical Properties of FUNaK (NaF-KF-UF4) Eutectics

Study of Thorium–uranium Based Molten Salt Blanket in a Fusion–fission Hybrid Reactor

Numerical Research On Steady Coupling Of Neutronics And Thermal-Hydraulics For A Molten Salt Reactor

Molten Fluoride Salt and Liquid Metal Multistage Extraction Model

On the Employment of a Chloride or Fluoride Salt Fuel System in Advanced Molten Salt Reactors, Part 1: Thermophysical Properties and Core Criticality

HT-NMR Studies of the Be-F Coordination Structure in FNaBe and FLiBe Mixed Salts

Estimation of Thermodynamic Properties of the Ternary Molten Salt System, LiF-NaF-BeF 2 , by the Modified Peng-Robinson Equation