Abstract:The difference in the reaction between thermosetting polyurethane (CPU) and binary alcohol system curing agents is crucial for obtaining accurate curing kinetics models and selecting curing agents. Based on a systematic comparison of the reaction activation energies and kinetic models of three different chain length fatty alcohol curing agents, ethylene glycol, 1,4-butanediol, and 1,6-hexanediol, the effect of curing agent chain length on the curing reaction was elucidated. Using differential and integral transformation methods to process non-isothermal DSC tests results, the effect of different chain lengths curing agents on the activation energy of MDI based polyurethane were analyzed. Based on the self-catalytic model, the segmented curing mechanism of the MDI based polyurethane systems were studied, and applicable high-precision segmented kinetic models' parameters were calibrated. The optimal curing conditions for these systems were determined using extrapolation. The research results indicate that when the curing degree increases to 95 %, the overall activation energy of the MDI/1,4-butanediol system decreases by 47.1 %, accompanied by a faster self-catalytic. However, the activation energies of the other two systems, MDI/propylene glycol system and MDI/1,6-hexanediol system increased by 62. % and 295.0 %, respectively. This slows down the reaction rate of the two systems, which was 7.8 % and 10.9 % slower than the MDI/1,4 butanediol. heir molecular cross-linking network limits the diffusion ability of their chains and reduces the self-catalysis, resulting in slow reactions. These results will provide theoretical guidance and reference for the material formulation,process optimization of MDI based polyurethane actual curing production.

Catalytic liquefaction of starch by sulfamic acid and its curing kinetics for preparing polyurethane

In Situ Polymerization of Starch with Lactic Acid in Aqueous Solution and the Microstructure Characterization

Learning about novel amine-adduct curing agents for epoxy resins: Butyl-glycidylether-modified poly(propyleneimine) dendrimers

Mechanical Properties of Polyurethane Foams Prepared from Liquefied Corn Stover with PAPI.

Optimization of Reaction Conditions for Polyurethane Foam Synthesis with Liquefied Corn Stalk by Response Surface Methodology

Curing Kinetics of Methylene Diphenyl Diisocyanate—Based Polyurethane Elastomers

Synthesis and characterization of starch-modified polyurethane

Relationship between starch liquefaction behavior and properties of polymer coated urea from liquefied starch

The kinetics of polyurethane moisture curing reaction: A combined experimental and DFT mechanistic study

The Kinetics of the Polyurethane Moisture Curing Reaction: a Combined Experimental and DFT Mechanistic Study

Curing polycondensation kinetics of multi-silanol

Investigation of the Curing Process of Spray Polyurea Elastomer by Ftir, Dsc, and Dma

Application of Tannin and Starch As Crosslinker in Modification of Polyurethane

Tin-Containing Crystalline Copolymers As Latent Catalysts for Polyurethanes

Preparation and properties of isocyanate prepolymer/corn starch adhesive

Curing kinetics of block copolymerization thermoset polyurethane by non‐isothermal DSC method

Comparative study on curing kinetics of MDI-based polyurethanes with different chain length diol curing agents

Esterification modified starch by phosphates and urea via alcohol solvothermal route for its potential utilization for urea slow-releasing

The role of urea on the dissolution of starch in NaOH–urea aqueous solutions

Cure Kinetics of an Optical Polythiourethane with Amine Catalyst by IR Analysis

Kinetic and chemorheological modeling of thermosetting polyurethanes obtained from an epoxidized soybean oil polyol crosslinked with glycerin