Abstract:In recent years, the types and quantities of polyurethane products have increased day by day. However, traditional petroleum-based water-based polyurethanes not only have the problem of difficult waste disposal, but also accelerate the depletion of petroleum materials. Herein, an eco-friendly polymer was successfully prepared by introducing tannic acid (TA) into castor oil-based waterborne polyurethane (WPU). The effects of the incorporation of TA, a bio-based material, on the particle size of the resulting polyurethane (PU) dispersion, and the thermal performance, mechanical properties, and hydrophobicity of PU membranes were systematically investigated. Finally, ATR-FTIR and SEM of cured films after degradation were measured to characterize the degradation ability of the membranes. It was found that the tensile strength of the samples is improved from 12.67 to 19.57 MPa with the TA content increasing from 0 to 1.5%, nevertheless their elongation at break declines from 306.51 to 237.12%. A noteworthy increase in the glass transition temperature (Tg) was exhibited by using DSC and DMA for the resulting PU films with increasing the TA content. Besides, the improvement in the water absorption of the blend films decreases from 14.5 to 10.2% according to the advantage of TA increasing the degree of cross-linking of the system. After 120 days of degradation, it can be seen that the urethane bond and the aliphatic ester bond played a vital role in the degradation process through the infrared of the degraded films. At the same time, the introduction of TA improves the degradation performance of WPU films. What is more, the application of WPU dispersions containing tannins on the leather surface shows excellent comprehensive performance, which means that WPU dispersions have potential applications as leather finishing agents. This work takes advantage of two kinds of bio-based materials, the mass of bio-based materials accounts for 57% of the total mass, which not only shortens the utilization of petroleum resources, but also effectively resolved the problem that poor quality of castor oil-based WPU and traditional waste is difficult to degrade, improving the commercial value of castor oil-based PU.

Application of Tannin and Starch As Crosslinker in Modification of Polyurethane

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Study on the Structure and Properties of Thermoplastic Starch Modified with Polyurethane

Synthesis and characterization of starch-modified polyurethane

Preparation of degradable castor oil-based waterborne polyurethane with tannic acid as crosslinking agent and its application on leather surface coating

Preparation and Properties of Plasticized Starch Modified with Poly(ε-Caprolactone) Based Waterborne Polyurethane

Toughening Enhancement Mechanism and Performance Optimization of Castor-Oil-Based Polyurethane Cross-Linked Modified Polybutylene Adipate/Terephthalate Composites

Starch films loaded with tannin: the study of rheological and physical properties

Continuous Blown Film Preparation of High Starch Content Composite Films with High Ultraviolet Aging Resistance and Excellent Mechanical Properties.

Preparation of Cross-Linked High Amylose Corn-Starch and Its Effects on Self-Reinforced Starch Films

Structure–properties Relationship of Starch/waterborne Polyurethane Composites

Effects of Ethyl and Benzyl Groups on the Miscibility and Properties of Castor Oil-Based Polyurethane/Starch Derivative Semi-Interpenetrating Polymer Networks

Study on Preparation of Biodegradable Polyurethane Foam

Effects of primary, secondary and tertiary structures on functional properties of thermoplastic starch biopolymer blend films

Effect of Cross-Linking and Enzymatic Hydrolysis Composite Modification on the Properties of Rice Starches

Preparation of a Polyhydric Aminated Lignin and Its Use in the Preparation of Polyurethane Film

Modification of starch and its blending with polyethylene

A simple method for preparation of lignin/TiO2 nanocomposites by sulfonation degree regulation and their application in polyurethane films

Modification of thermoplastic polyurethane through the grafting of well-defined polystyrene and preparation of its polymer/clay nanocomposite

Special interface structure and properties for compatible packaging film from biodegradable poly (butylene adipate‐co‐terephthalate)/corn starch composite