Curing Kinetics of Methylene Diphenyl Diisocyanate—Based Polyurethane Elastomers

Shuang Liu,Xiaodong Li,Mengchen Ge,Xujie Du,Meishuai Zou

DOI: https://doi.org/10.3390/polym14173525

IF: 5

2022-08-28

Polymers

Abstract:The curing kinetics of MDI-based polyurethane elastomers were studied by non-isothermal differential scanning calorimetry (DSC). The kinetic parameters of the reaction system were calculated by the Kissinger method. The changing activation energy was observed by the Flynn–Wall–Ozawa method and the Friedman method. The results of model free fitting showed that the curing reaction could be divided into two stages, showing a change in reaction order when α > 0.45 and a piecewise curing mechanism function of the MDI-based polyurethane elastomers reaction system was deduced by autocatalytic model. The extrapolation method was used to determine the optimum curing conditions for the system, which can accurately describe the curing process. In addition, the optimal curing conditions are when: the constant temperature curing temperature of the system is 81 °C, the curing time is 29 min, and the post-curing temperature is 203 °C.

polymer science

What problem does this paper attempt to address?

The problem this paper attempts to address is the study of the curing kinetics of polyurethane elastomers based on toluene diisocyanate (MDI). Specifically, the authors investigate the curing reaction process of MDI-based polyurethane elastomers using non-isothermal differential scanning calorimetry (DSC), calculate the kinetic parameters of the reaction system, and analyze the kinetic mechanism of the curing reaction. Through these studies, the authors aim to provide theoretical guidance for the curing process of MDI-based polyurethane elastomers and optimize industrial production conditions.

The main research contents include:
1. **Calculation of curing kinetic parameters**: The Kissinger method was used to calculate the kinetic parameters of the reaction system, such as the apparent activation energy (Ea) and the pre-exponential factor (A).
2. **Changes in activation energy**: The changes in activation energy were observed using the Flynn–Wall–Ozawa method and the Friedman method, revealing different trends in activation energy when α > 0.45.
3. **Curing reaction mechanism**: Using a model-free fitting method, the curing reaction was divided into two stages, and the segmented curing mechanism function of the MDI-based polyurethane elastomer reaction system was derived.
4. **Determination of optimal curing conditions**: The optimal curing conditions of the system were determined using the extrapolation method, including an isothermal curing temperature of 81°C, a curing time of 29 minutes, and a post-curing temperature of 203°C.

These research results provide important theoretical basis for accurately monitoring and controlling the curing process of MDI-based polyurethane elastomers.